Page 1 of 1
telnet 8028s
Posted: 12 Jun 2017 04:33
by dbruder
Anyone knows how to telnet to the new 8028s-series?
I do a
like I did on the 8028/8038/8068 (where xxx is the extension number), but when I try to telnet to the corresponding ip address I get
telnet: Unable to connect to remote host: Connection refused
Thanks for any hints!
Re: telnet 8028s
Posted: 12 Jun 2017 08:51
by tot3nkopf
Is that phone in service?
Re: telnet 8028s
Posted: 12 Jun 2017 13:35
by tgn
tc2308ed01 chapter 17:
Code: Select all
Start by connecting to the phone ( through SSH login:admin )
regards...
--- back to basics... focus your eyes to the essential things... ---
Re: telnet 8028s
Posted: 13 Jun 2017 02:41
by dbruder
yes, the phone is in service
tgn, thank you very much! (I could have thought of ssh myself
it works with "ssh -2"
Re: telnet 8028s
Posted: 13 Jun 2017 03:05
by tgn
nice to know.
maybe you don't need the -2 if oxe has sshv2 activated.
regards...
--- back to basics... focus your eyes to the essential things... ---
Re: telnet 8028s
Posted: 13 Jun 2017 03:38
by dbruder
to be more precise, you have to use
password is *tx8000#
"ssh -2 admin@ip-address ip-address" doesn't work
Re: telnet 8028s
Posted: 01 Jun 2021 05:23
by swinstu
Worked for me as follows on OXE R12.3.1 with ssh enabled:
OXE>ippstat telnet d 65333 t 15 (## Or alternatively using command "ippstat" option 15 )
OXE>ssh -2 -l admin 10.88.57.66 (## ip address extracted via ippstat command option 2 or 3)
(password - *tx8000#)