PBX Interconnect
Posted: 20 Jan 2018 03:41
Dear Alcatel gurus,
I got 2 alcatel pbx for 'playing'. I'm a quite newbie in alcatel.
One is a common hardware-small, the other is two common harware large cabinet.
Both running 8.0.1 version.
Currently I'm tried in small equipment the following task (in a test environment):
When the user dials 41xx, the call need to be routing to a Cisco router (RTR_A) via ISDN trunk,
when dials 42xx need to route an another trunk.
I played with an OXO a few month ago, and with it I simply do this task.
When I use "ARS Prof.Trg Grp Seiz.with Overlap" for prefix "41", I got a new dial tone, and the user now dials 41xx the dial works (but he dials 41 4102)
It uses he OXE side "ISDN All countries", at the Cisco side "basic-net3" isdn switch settings, The NT devices is the Cisco equipment.
In sysdoc found a procedure, under "Heterogeneous QSIG network":
So I created
TrunkGroup 77 with QSIG signalling, that contains an ISDN port from MIX board (2-1-2)
The BChannel settigns I tried both true and false
The 2-1-2 port uses network mode false (but I tried true)
I created a trunk group 22 with ABC-F. (But why? these not contains ports, and I not shown any reference for TG 77. Or if this TG 22 contains the 2-1-2 port, what need for TG 77?)
In Prefix plan I create :
Number 41
Prefix Meaning: Routing .No.
Network: 2
ABC-F: 22
Digits: 4
In Network Routing Table, Network Number 2:
Protocol Type: QSIG-GF
Dialing Plan Descriptor ID: 11
ARS Route list: 9.
The ARS 9 contains an entry with: 41 -> 77, or 41 -> 22.
I changed the Cisco side to basic-qsig isdn swith type.
Both direction was failed.
The Cisco->OXE direction: Busy
The OXE->Cisco direction: Throtting (Torolódás)
the t3 trace not shown anyting.
What I missed, or how can I accomplish the mission?
The next question about licencing:
The small equipment has the following licence:
19 Corporate netw. (ABC,ABCVPN,ISVPN) = 50
The large equipment:
19 Corporate netw. (ABC,ABCVPN,ISVPN) = 0
So, this routing what I need I can accomplish only in the small equipment?
I can use a soft phone with my system? Where can I download it?
116 ECC My Softphone (4980 Std) = 5000
117 M ECC 4980 Option (4980 Adv) = 0/ 5000
Many-many thanks.
I got 2 alcatel pbx for 'playing'. I'm a quite newbie in alcatel.
One is a common hardware-small, the other is two common harware large cabinet.
Both running 8.0.1 version.
Currently I'm tried in small equipment the following task (in a test environment):
When the user dials 41xx, the call need to be routing to a Cisco router (RTR_A) via ISDN trunk,
when dials 42xx need to route an another trunk.
I played with an OXO a few month ago, and with it I simply do this task.
When I use "ARS Prof.Trg Grp Seiz.with Overlap" for prefix "41", I got a new dial tone, and the user now dials 41xx the dial works (but he dials 41 4102)
It uses he OXE side "ISDN All countries", at the Cisco side "basic-net3" isdn switch settings, The NT devices is the Cisco equipment.
In sysdoc found a procedure, under "Heterogeneous QSIG network":
So I created
TrunkGroup 77 with QSIG signalling, that contains an ISDN port from MIX board (2-1-2)
The BChannel settigns I tried both true and false
The 2-1-2 port uses network mode false (but I tried true)
I created a trunk group 22 with ABC-F. (But why? these not contains ports, and I not shown any reference for TG 77. Or if this TG 22 contains the 2-1-2 port, what need for TG 77?)
In Prefix plan I create :
Number 41
Prefix Meaning: Routing .No.
Network: 2
ABC-F: 22
Digits: 4
In Network Routing Table, Network Number 2:
Protocol Type: QSIG-GF
Dialing Plan Descriptor ID: 11
ARS Route list: 9.
The ARS 9 contains an entry with: 41 -> 77, or 41 -> 22.
I changed the Cisco side to basic-qsig isdn swith type.
Both direction was failed.
The Cisco->OXE direction: Busy
The OXE->Cisco direction: Throtting (Torolódás)
the t3 trace not shown anyting.
What I missed, or how can I accomplish the mission?
The next question about licencing:
The small equipment has the following licence:
19 Corporate netw. (ABC,ABCVPN,ISVPN) = 50
The large equipment:
19 Corporate netw. (ABC,ABCVPN,ISVPN) = 0
So, this routing what I need I can accomplish only in the small equipment?
I can use a soft phone with my system? Where can I download it?
116 ECC My Softphone (4980 Std) = 5000
117 M ECC 4980 Option (4980 Adv) = 0/ 5000
Many-many thanks.