Page 1 of 1
Vmware ESX & Omnivista
Posted: 17 Oct 2007 09:50
by luckyme2
Just some info :
Just installed R4.2 Omnivista in a VMware ESX session (5200 users).
It's running smoothly as if it is was installed on a standalone PC.
Everything is working fine.
Minor detail : for the session to work properly you have to assign 2 CPU's
to it (beside the prereqs from Omnivista)
Grtzz
lm2
Re: Vmware ESX & Omnivista
Posted: 18 Oct 2007 10:49
by torrentula
That's good to know, I have never installed it in a virtual and had a customer asked me that very question the other day.
I assume it will run on standard as well.
Thanks.
Re: Vmware ESX & Omnivista
Posted: 19 Oct 2007 10:14
by alexeik
we did a similar thing some time ago... works fine so long.
But be warned, there is no support by Alcatel, when they find out...
Re: Vmware ESX & Omnivista
Posted: 23 Oct 2007 03:19
by tot3nkopf
Are the Omnivista alarms working on your VmWare appliance?
Re: Vmware ESX & Omnivista
Posted: 23 Oct 2007 08:59
by luckyme2
tot3nkopf wrote:Are the Omnivista alarms working on your VmWare appliance?
Yes, they are !
Checked today reporting, accounting, maintenance, sheduler and it is still ok !
Beside the 2 cpu I mentioned before, it is best to use the Omnivista client from a remote
pc and not on the server itself. If using on the server, the client is very slow. I noticed
the client using up all available memory during that session. So stick to what ALU says :
don't use the client from the server.
Note: This is Vmware ESX (not GSX), just to be clear
