Alcatel Unleashed

Hi Team

Please help me

How to change form 5060 to 5070 in the Rainbow Webcrt

------------------------------------------------------------------------------------------------------------------------------------------------------
rainbow@rainbow-mpgw:~$ mpcheck
Network settings ...
[OK]
Rainbow settings ...
[OK]
RAINBOW connect ...
[FAILED] Rainbow connection can -NOT- be established
STUN test turn-sgp1.openrainbow.com ...
0: IPv4. UDP reflexive addr: 14.241.231.23:37587
[OK] stunclient test
TURN test turn-sgp1.openrainbow.com ...
0: IPv4. Connected from: 192.168.3.253:53397
0: IPv4. Connected to: 139.99.120.111:3478
0: allocate response received:
0: allocate response received:
[OK] turnclient test
PBX_DOMAIN access ...
ping -4 -c 2 192.168.3.245
[OK] ping 192.168.3.245
PBX_DOMAIN SIP OPTIONS ...
[OK] success
registration access ...
traceroute -n -m 4 -T -p 5060 192.168.3.253
[OK] route 192.168.3.253
rainbow@rainbow-mpgw:~$

Ip WebCRT wateway : 192.168.3.253 default port 5060 , I want to change to 5070 port

Hello Luan-Duong,

It is possible however when you perform an upgrade on the WebRTC it will revert back.

The other issue is WebRTC will always register users from Rainbow using port 5060, so you can only add a listening port but not change it 100% to 5070 only.

The attached guide should help.

Cheers