Page 1 of 1

UNIT 0 ERROR Interrupt: CMIC_DMA_STAT = 0x189600e PCI Fatal error on DMA CH0. on boot and crash system

Posted: 29 May 2020 12:04
by DINOPAIOLI
i have a problem on alcatel switch 6850E 24P that it crash during boot.
I reset the configuration but the problem still again. I also restore the factory default config.
The error asks: UNIT 0 ERROR Interrupt: CMIC_DMA_STAT = 0x189600e PCI Fatal error on DMA CH0.
Attached you could see the detail from console.

Re: UNIT 0 ERROR Interrupt: CMIC_DMA_STAT = 0x189600e PCI Fatal error on DMA CH0. on boot and crash system

Posted: 02 Jun 2020 12:43
by frank
You might have a bad chip in this chassis. Might want to RMA it and get a replacement.

Re: UNIT 0 ERROR Interrupt: CMIC_DMA_STAT = 0x189600e PCI Fatal error on DMA CH0. on boot and crash system

Posted: 10 Jun 2020 11:23
by DINOPAIOLI
THANK YOU FRANK!!