Page 1 of 1
Help
Posted: 05 Jan 2022 05:54
by gitango2011
The below coupler can not be reset
19 | 2 | INTIP3A 0ARMAD* | OUT OF SERVICE | 0/0 | 0/0
the message as below:
This is a fictitious coupler
It can't be reset.
See others tools for specific terminals.
any idea thanks
Re: Help
Posted: 05 Jan 2022 17:34
by haroun
(1)pst_cpu6> config 19
Wed Jan 5 22:26:08 /etc/localtime 2022
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 19 | 0 | FICTIF| | REG NOT INIT | NO PCMS CODE |
| 19 | 2 | INTIPA| | IN SERVICE | NO PCMS CODE |
| 19 | 3 | INTIPA| | OUT OF SERV | NO PCMS CODE |
+-------------------------------------------------------------------+
Re: Help
Posted: 06 Jan 2022 19:20
by gitango2011
haroun wrote: ↑05 Jan 2022 17:34
(1)pst_cpu6> config 19
Wed Jan 5 22:26:08 /etc/localtime 2022
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 19 | 0 | FICTIF| | REG NOT INIT | NO PCMS CODE |
| 19 | 2 | INTIPA| | IN SERVICE | NO PCMS CODE |
| 19 | 3 | INTIPA| | OUT OF SERV | NO PCMS CODE |
+-------------------------------------------------------------------+
yes same as you
Re: Help
Posted: 09 Jan 2022 03:52
by haroun
normal behaviour