No output on Hyper Terminal during CPU-7 booting.

[Sam2009]

Hi All
I have Alcatel OXE cyrstal HW , CPU-7 , Release 9.0 , after an electricity problem , the system was crash, when try to login I get:

Welcome to gcc
Alcatel-Lucent OmniPCX Enterprise
login: mtcl
Password:
Alcatel-Lucent OmniPCX Enterprise
standard installation last performed: 24-Feb-2006 03:33:03

No directory /DHS3bin/mtcl!
Logging in with home = "/".
dumpsave: Cannot open kernel map file /boot/System.map
open: Too many levels of symbolic links
-bash-2.05b$

I try to reinstall new system. But when I try to login console via direct serial connection , I couldn't get any output on Hyper Terminal during booting.
after the CPU had completed the booting then I get login only:
Alcatel-Lucent OmniPCX Enterprise
login:

I try two console cables , try putty app. the same issue
Is there any advice to solve this problem to be able access to CPU during boot to for doing the necessary steps for new release installation.

[vad]

May be you use COM B instead of COM A?

[Sam2009]

thanks vad

yes I used B0, because A0 didn't work

[Sam2009]

I use CPU/CBRMA cable 3BA 28040 xx to connect CPU with CBRMA Box

[frank]

Did you try another CPU with another HD by any chance?