Page 1 of 1
Search for firmware or other for IP TOUCH 4068
Posted: 21 Apr 2022 12:23
by cabajo
Hi, I have an IP TOUCH 4068, with the fw NOE 3.91.40. I would like to use it with the Fritzbox, so in SIP. I have read a lot of things on this forum, some very old and honestly I am lost! It seems that there are modified fw (but they are nowhere to be found) that allow operation in SIP mode. Does anyone have such files? I would be enormously grateful!
Alessandro Italy.
Re: Search for firmware or other for IP TOUCH 4068
Posted: 21 Apr 2022 14:00
by frank
Well... first of, you are going to need a TFTP server and/or OXE and/or OXO. Do you have any of this before you try anything like that?
Re: Search for firmware or other for IP TOUCH 4068
Posted: 22 Apr 2022 04:32
by alex
First of all you should check whether you have 4068EE - only that one works in dual stack mode (more flash memory on board).
Re: Search for firmware or other for IP TOUCH 4068
Posted: 24 Apr 2022 09:11
by cabajo
Thanks a lot for answers, have a tftp but not the EE version of 4068....
Is there really no way to make 4068 work with an Asterisk or a FritzBox in SIP mode? Should I put it in the trash ...? Thanks again
Re: Search for firmware or other for IP TOUCH 4068
Posted: 27 Apr 2022 04:57
by alex
cabajo wrote: ↑24 Apr 2022 09:11
have a tftp but not the EE version of 4068....
Is there really no way to make 4068 work with an Asterisk or a FritzBox in SIP mode? Should I put it in the trash ...? Thanks again
There is no way to run SIP on your 4068 so you're right about trash.
Re: Search for firmware or other for IP TOUCH 4068
Posted: 20 May 2022 12:49
by cabajo
frank wrote: ↑21 Apr 2022 14:00
Well... first of, you are going to need a TFTP server and/or OXE and/or OXO. Do you have any of this before you try anything like that?
Yes, i have a TFTP Server.... i programmed with success NEC DT700 and DT 800 to reverse from NECSIP to StandardSIP.
Thanks.
Alessandro.