Hello,
first time for me with an Alcatel-Lucent Enterprise OS6360-24 8.7.98.R03 GA.
I googled a lot of time but no solution for me.
My problem is the configuration of emp interface to manage the switch via browser.
Here's my step after the boot:
1) Changed admin password
2) Configured date, time, time zone
3) Unlocked all sessions type (aaa authentication default local)
4) Configured my amp interface (ip interface temp address 10.0.1.55 mask 255.255.255.0)
5) Plugged a cable from my Pc to switch but no way to go to my web page
Some suggestion?
EMP INTERFACE HOW CAN ACTVATE IT
- Gleylancer
- Member
- Posts: 155
- Joined: 08 May 2013 03:14
Re: EMP INTERFACE HOW CAN ACTVATE IT
What is the IP address of your PC? Are you in the same network?
Last edited by Gleylancer on 13 Jul 2022 06:57, edited 1 time in total.
Re: EMP INTERFACE HOW CAN ACTVATE IT
My PC IP address is 10.0.1.57 255.255.255.0.
If i do "show ip emp-interface" the output don't show nothing as you can see below;
-> show ip emp-interfaces
Total 1 interfaces
Flags (D=Directly-bound)
Name IP Address Subnet Mask Status Forward Device Flags
--------------------------------+---------------+---------------+------+-------+---------+------
->
If i do "show ip emp-interface" the output don't show nothing as you can see below;
-> show ip emp-interfaces
Total 1 interfaces
Flags (D=Directly-bound)
Name IP Address Subnet Mask Status Forward Device Flags
--------------------------------+---------------+---------------+------+-------+---------+------
->
Re: EMP INTERFACE HOW CAN ACTVATE IT
Resolved;
tnx to this topic https://www.alcatelunleashed.com/viewtopic.php?t=28780
tnx to this topic https://www.alcatelunleashed.com/viewtopic.php?t=28780