Alcatel Unleashed

Good day Guys,

I need to shutdown and remove the master chassis from the OS6860E switch stack. What is the safest way of removing the master?
Can I just do command, virtual-chassis shutdown , and then physically remove the chassis ?

Thank you,

<<< Stack info >>>

-> sh chassis
Local Chassis ID 1 (Master)
Model Name: OS6860E-U28,
Module Type: 0x6062205,
Description: Chassis,
Part Number: 903712-90,
Hardware Revision: 13,
Serial Number: U18Q0214,
Manufacture Date: May 2 2016,
Admin Status: POWER ON,
Operational Status: UP,
Number Of Resets: 24,
MAC Address:

Remote Chassis ID 2 (Slave)
Model Name: OS6860-24,
Module Type: 0x6062201,
Description: Chassis,
Part Number: 903713-90,
Hardware Revision: 12,
Serial Number: T3882761,
Manufacture Date: Sep 20 2015,
Admin Status: POWER ON,
Operational Status: UP,
Number Of Resets: 28,
MAC Address:

Remote Chassis ID 3 (Slave)
Model Name: OS6860-24,
Module Type: 0x6062201,
Description: Chassis,
Part Number: 903713-90,
Hardware Revision: 12,
Serial Number: T3882743,
Manufacture Date: Sep 20 2015,
Admin Status: POWER ON,
Operational Status: UP,
Number Of Resets: 26,
MAC Address:

Remote Chassis ID 4 (Slave)
Model Name: OS6860E-U28,
Module Type: 0x6062205,
Description: Chassis,
Part Number: 903712-90,
Hardware Revision: 14,
Serial Number: V41Q0152,
Manufacture Date: Dec 2 2017,
Admin Status: POWER ON,
Operational Status: UP,
Number Of Resets: 17,
MAC Address:

-> sh virtual-chassis chassis-id 1 topology
Legend: licenses-info - A: Advanced; B: Data Center;

Oper-Chassis-ID : 1,
Config-Chassis-ID : 1,
Chassis-Role : Master,
Previous-Chassis-Role : Unassigned,
Chassis-Status : Running,
Chassis-Group : 169,
Chassis-MAC : ,
Up-Time : 476 days 13 hours 30 minutes and 1 seconds,
Designated-NI : 1,
Primary-CMM : CMM-A,
Secondary-CMM : Not present,
Chassis-Type : OS6860,
License : A,
Hello-Interval : 15,
Oper-Chassis-Priority : 250,
Config-Chassis-Priority : 250,
Oper-Control-VLAN : 4094,
Config-Control-VLAN : 4094,
VFLink-Mode : Auto,
Split-Detect-Protocol : RCD,
Number-Of-Neighbors : 3,
Number-Of-Direct-Neighbors : 2

Neighbor Is-Direct Shortest-Path
---------+----------+---------------------------------------------------------------------
2 Yes 1/1->2/1
3 No 1/1->2/1->2/0->3/1
4 Yes 1/0->4/1

Yes - the shutdown command for the master-chassis is possible (and the best way). You also can do a "hard" power down of the master. In both cases one of the slaves will takeover the master role.
BR Silvio

Thank you very much Silvio. Much appreciated.