Alcatel Unleashed

Dear All,

i am new to OmniPCX Enterprise pbx. version 12.4.

how i can check all installed phones that are working and not working. basically looking for a inventory with all possible info to match with our purchase list of phones.

Thanks.

What do you mean when say "working"? F.e. if analogue phone in services but during two weeks - 0 calls (from|to) - working or not?
Some command can give you information - listout, listerm, ippstat...

no talking about only ip phones.
all configured and connected IP phones
all configured but not connected/removed ip phones
with Ext and Mac address.

in this case ippstat

Thanks Haroun, command is really help full.

kindly let me know some other help full commands/guides/videos since i m going to handle this PBX system. i need to learn about it.

Thanks

hi
see system doc, and type help at prompt CLI or press the t*******n key
ps : be careful, do not type any command some of them can make u in troubles and should be run under R&D request , I highly recommend you to get a training there area bunch of them, starter, to pushed ones.