STP issue how to solve?
Posted: 07 Jul 2023 08:11
hI;
i have this issue :
OS 6450 several and DSS 6900 Switches ..normally works all fine
6.7.2.102 R07 FW
Per Vlan Spanning Tree is enforced !! (1x1 mode)
INACTIVE Spanning Tree Parameters for Flat Mode
Spanning Tree Status : ON,
Protocol : IEEE Rapid STP,
Priority : 32768 (0x8000),
TxHoldCount : 3,
System Max Age (seconds) = 20,
System Forward Delay (seconds) = 15,
System Hello Time (seconds) = 2
Now saw lots of
STP info Topology changed on VLAN/STP id x (different vlans)
Couldnt find any uplink which should flapping ..
how i can determine where this issue has its ground?
thanks a lot
Regards
i have this issue :
OS 6450 several and DSS 6900 Switches ..normally works all fine
6.7.2.102 R07 FW
Per Vlan Spanning Tree is enforced !! (1x1 mode)
INACTIVE Spanning Tree Parameters for Flat Mode
Spanning Tree Status : ON,
Protocol : IEEE Rapid STP,
Priority : 32768 (0x8000),
TxHoldCount : 3,
System Max Age (seconds) = 20,
System Forward Delay (seconds) = 15,
System Hello Time (seconds) = 2
Now saw lots of
STP info Topology changed on VLAN/STP id x (different vlans)
Couldnt find any uplink which should flapping ..
how i can determine where this issue has its ground?
thanks a lot
Regards