Alcatel Unleashed

Hi,
I had an issue this week I just wanted to verify:
I have a 6360-P24 where the uplink is a 1G radio relay link powered by PoE.
As it is an uplink I connected this to the uplink copper port (1/1/25), set to "hybrid-mode copper".

I didn't achieve to power the radio link on 1/1/25. Is that true?

Best regards

Marc

The information you are looking for is in the model datasheet.

The OS6360-P24 has 24 PoE Ports (Thats why it's named "P24"). Everything above 24 is not one of them.

Hi,
thanks. That's how I now will remember it. But if you configure the switch on your desktop you normally do not emulate a poe-powered radio link. I had to visit the switch a second time to reconfigure a "user port" as uplink port.

Now I know that. I just wanted others to realize this before running into problems.

BTW it might also be possible to use an injector if wanted. But only after the first fail.

Thanks and best wishes from a nicely heated bureau at 29.4°C .

Marc