Alcatel Unleashed

where is that assigned in the PCX?
what commands will give me that info?

Thanks

It's either static on the board or DHCP through the system. I always statically assign them.

You can see what it is currently using by going to:

Shelf>Descend>Board>Descend>Ethernet Parameters>Review Modify shelf and board address of the INTIP

Great I found it.

I am realizing now that my Gateway IP address is wrong. The board is operating, but I am unable to see it with my network monitoring device.

Can I change the Gateway on the fly or is it something that should be done on off hours?

Does anything else need to be changed anywhere when I change the Gateway IP address?

Thanks

Once you change the Gateway address and validate the change, the INTIP board will reset.

So the choice is yours!

hi

with login in mtcl account , you use intipstat to display all IP address INT-IP board in the OXE

best regards

On IP board, cplstat Cr Cpl give you information of IP configuration.
G.

You can read IP address and/or manage (mgr or 4760) - Shelf/board/Ethernet parameters.

!!! For GA or INTIPA - decleare IP address, Net mask and GW.
!!! For GD or INTIPB - decleare MAC address (IP address GD/INTIPB receive from DHCP or you can decleare static IP address via com port).

or check all IP boards addresses with compvisu ip add