how to load software using fresh hard disk in enterprise .
Posted: 19 Aug 2005 05:26
hard disk has been crashed. how to load software using fresh harddisk? i am using cpu6, trying to load release 6.1, f2500-6- i version.
Alcatel Unleashed
The #1 Worldwide board for technical support on Alcatel-Lucent Voice & Data gear.
https://alcatelunleashed.com/
how to load software using fresh hard disk in enterprise .
Page 1 of 1
Posted: 19 Aug 2005 17:58
Do you have PCInstaller software?
Posted: 20 Aug 2005 05:34
yes i have 219v pc installer. i have DHS3mgr( r6.1-f2500-6-i) software with static and dynamic patch software.
Posted: 22 Aug 2005 00:25
Place sowtware in next order:
on disk C make folder "dhs3mgr", in this folder you must have subfolders - f2500 (with release), f25006 (with static patch), f25006i (with dynamic patch).
Start PCInstaller, select type of installation "Linux+Call handling", you will have next menu, select Call server type "A4400" and manage IP adress (if necessary).
On PBX (use V24 on ComA) - restart CPU, cancel autoboot and select boot, boot from Ethernet, standart installation yes, version f25006."you country", Enter (two times), witch file - f.e. %23.0 (witch digits must be entered consult - /dhs3mgr/f2500/pcmao/boot_res/bootp/linux).
After this will be automaticly installed linux, binary (f2500), patch (f25006).
When installation will finished - install dynamic patch.
on disk C make folder "dhs3mgr", in this folder you must have subfolders - f2500 (with release), f25006 (with static patch), f25006i (with dynamic patch).
Start PCInstaller, select type of installation "Linux+Call handling", you will have next menu, select Call server type "A4400" and manage IP adress (if necessary).
On PBX (use V24 on ComA) - restart CPU, cancel autoboot and select boot, boot from Ethernet, standart installation yes, version f25006."you country", Enter (two times), witch file - f.e. %23.0 (witch digits must be entered consult - /dhs3mgr/f2500/pcmao/boot_res/bootp/linux).
After this will be automaticly installed linux, binary (f2500), patch (f25006).
When installation will finished - install dynamic patch.
Posted: 23 Aug 2005 13:15
how to cancell autoboot? because when i restart cpu i do not get any options to stop autoboot?
Posted: 23 Aug 2005 22:44
When you have connected V24 cabel (ComA) and terminal program (9600,8N1, flow control Not), after shutdown - you will see messages from bios (info about CPU bios version) and text (I don't remember exactly) "cancel autoboot". You have 5 sec - press Enter.
Posted: 29 Aug 2005 11:24
still i could not able to get any options to stop auto boot. i caputed following info when cpu boots up.
--------------------------------------------
BIOS Version 3BA_24095_AAAB_06
Generated on fillld0f00258 on Dec/17/2004 at 10:10
CPU6 Step 2 version 3BA 23197 : 0.1 ***
*** ELAN SC520 @ 100MHz
System Times
CLK Time : Mon Aug 29 13:21:49 2005
Analyzing the input file
----- Auto Boot in 5 s ----- ----- Auto Boot in 4 s -----
----- Auto Boot in 3 s ----- ----- Auto Boot in 2 s ----- ----- Auto Boot in 1 s -----
---- Too late now ----no switch back.
GRUB version 0.5.96 (640K lower / 130048K upper memory)Press enter to boot the default OS [0], 'c' for a command-line,or give an another entry number [0]: Boot GNU/Linux [default] [1]: Install GRUB into the hard disk the default entry [0] will be booted automatically in 5 seconds.
the default entry [0] will be booted automatically in 4 seconds.
the default entry [0] will be booted automatically in 3 seconds.
the default entry [0] will be booted automatically in 2 seconds.
the default entry [0] will be booted automatically in 1 seconds.
Booting 'Boot GNU/Linux [default]'root (hd0,4)kernel /boot/vmlinuz root=/dev/hda5 console=ttyS0,9600 panic=5 [Linux-bzImage, setup=0xa00, size=0x9f2e4]Added 4 region for memory mapBootinfo src = 0x0 Bootinfo dst = 0xc0107000
Linux version 2.4.1-ll-dhs3 (infrafox@cb100s006) (gcc version 2.95.2 19991024 (release)) #1 Tue Mar 29 11:55:20 MEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 00000000000a0000 @ 0000000000000000 (usable)
BIOS-e820: 0000000000020000 @ 00000000000a0000 (reserved)
BIOS-e820: 0000000007f00000 @ 0000000000100000 (usable)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda5 console=ttyS0,9600 panic=5
Initializing CPU#0
Calibrating delay loop... 49.35 BogoMIPS
Memory: 126640k/131072k available (944k kernel code, 4048k reserved, 387k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Cpu type: CPU6s2
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 00000001 00000000 00000000, vendor = 2
CPU: After vendor init, caps: 00000001 00000000 00000000 00000000
CPU: After generic, caps: 00000001 00000000 00000000 00000000
CPU: Common caps: 00000001 00000000 00000000 00000000
CPU: AMD 486 DX/4-WB stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 84109kB/28036kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hd0: C/H/S=16383/16/0 from BIOS ignored
hda: TOSHIBA MK2023GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors (20004 MB), CHS=38760/16/63
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17 >
Serial driver version 5.02 (2000-08-09) with SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 11) is a 16550A
ttyS03 at 0x02e8 (irq = 13) is a 16550A
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.3 Ben Greear <greearb@candelatech.com>
vlan Initialization complete.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 176k freed
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting Welcome to Linux Mandrake
Press 'I' to enter interactive startup.
Mounting proc filesystem [ OK ]
Configuring kernel parameters: [ OK ]Setting clock (utc): Mon Aug 29 15:22:15 CEST 2005 Mon Aug 29 15:22:15 CEST 2005
[ OK ]Activating swap partitions: [ OK ]Setting hostname xa000000: [ OK ]Checking root filesystem
DHS3ROOT: clean, 15657/128016 files, 106858/512032 blocks
[ OK ]Remounting root filesystem in read-write mode: [ OK ]Finding module dependencies /etc/rc.sysinit(1): Finding module dependencies
[ OK ]Checking filesystems
DHS3ROOT2: clean, 11/128016 files, 16169/512032 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3BIN: clean, 1454/128256 files, 73913/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3DATA: clean, 3722/128256 files, 44903/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3DYN: clean, 455/544000 files, 30183/1086238 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3BIN2: clean, 11/128256 files, 4039/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3DATA2: clean, 11/128256 files, 4039/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3EXT: clean, 140/256512 files, 33798/512056 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3VAR: clean, 163/102800 files, 18819/409601 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3VAR2: clean, 11/102800 files, 12991/409601 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Mounting local filesystems /etc/rc.sysinit(1): Mounting local filesystems
[ OK ]Checking loopback filesystems
/etc/rc.sysinit(1): Checking loopback filesystems
[ OK ]Mounting loopback filesystems: /etc/rc.sysinit(1): Mounting loopback filesystems:
[ OK ]Enabling swap space: /etc/rc.sysinit(1): Enabling swap space:
[ OK ]
INIT: Entering runlevel: 3Entering non-interactive startup
Starting dhs3mod: Loading Alcatel-specific modules: /etc/rc3.d/S02dhs3mod(1): dhs3mod startup
[ OK ]/etc/rc.d/rc(1): Starting dhs3mod:
[ OK ]Starting eva: Loading Alcatel-EVA modules: /etc/rc3.d/S02eva(1): eva startup
[ OK ]/etc/rc.d/rc(1): Starting eva:
[ OK ]Starting kdebug services: new debug mode: dump
/etc/rc3.d/S02kdebug(1): Starting kdebug services:
[ OK ]Starting watchdog: Starting watchdog services:
/etc/rc.d/rc(1): Starting watchdog:
[ OK ]Remove not allowed accounts: /etc/rc3.d/S09security(1): Remove not allowed accounts:
[ OK ]Setting network parameters: /etc/rc3.d/S10network(1): Setting network parameters:
[ OK ]Bringing up interface lo: /etc/rc3.d/S10network(1): Bringing up interface lo:
[ OK ]Enabling IPv4 packet forwarding /etc/rc3.d/S10network(1): Enabling IPv4 packet forwarding
[ OK ]Bringing up interface eth0: /etc/rc3.d/S10network(1): Bringing up interface eth0:
[ OK ]Starting netadmin: /etc/rc.d/rc(1): Starting netadmin:
[ OK ]Starting netadmind: /etc/rc.d/rc(1): Starting netadmind:
[ OK ]Initializing random number generator: /etc/rc3.d/S20random(1): Initializing random number generator:
[ OK ]Starting gwlinuxfifo: Creation de la fifo:
/etc/rc.d/rc(1): Starting gwlinuxfifo:
[ OK ]Starting system logger: /etc/rc3.d/S30syslog(1): syslogd startup
[ OK ]Starting kernel logger: /etc/rc3.d/S30syslog(1): klogd startup
[ OK ]Starting dhslog: Loading Alcatel-specific log functionality: /etc/rc3.d/S31dhslog(1): dhslog startup
[ OK ]/etc/rc.d/rc(1): Starting dhslog:
[ OK ]Starting at daemon: /etc/rc3.d/S40atd(1): atd startup
[ OK ]Starting cron daemon: /etc/rc3.d/S40crond(1): crond startup
[ OK ]Starting xinetd: /etc/rc3.d/S56xinetd(1): xinetd startup
[ OK ]Starting kheader: /etc/rc.d/rc(1): Starting kheader:
[ OK ]Loading chorus/mix emulation layer:/etc/rc3.d/S98emulation(1): S98emulation
[ OK ]
Linux Mandrake for eMediate release 7.2 (Odyssey) for i486
Kernel 2.4.1-ll-dhs3 on an i486 / ttyS0
xa000000 login: Linux Mandrake for eMediate release 7.2 (Odyssey) for i486
Kernel 2.4.1-ll-dhs3 on an i486 / ttyS0
xa000000 login: mtcl
Password:
Last login: Tue Aug 23 18:00:39 on ttyS1
Alcatel OmniPCX Enterprise
standard installation last performed: 25-May-2005 16:55:35
(E)xa000000> incvisu
23/08/05 17:46:35
23/08/05 17:46:51 000001I|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:46:52 000001I|--/--/-/---|=2:2700x002=Software package Error 1 info2 -1 info3 -1
23/08/05 17:46:52 000001I|--/--/-/---|=2:2700=Software package Error 4 info2 2 info3 -1
23/08/05 17:46:57 000001I|--/--/-/---|=4:2199=A4400 Version : R6.1-f2.500-6-i-ng-c6s2
23/08/05 17:46:59 000001I|--/--/-/---|=2:4351=Incoherent data: appli INITREM table ENTITY cause 0 info -1 -1 -1
23/08/05 17:46:59 000001I|--/--/-/---|=2:4351=Incoherent data: appli INITREM table ENTITY cause 1 info -1 -1 -1
23/08/05 17:47:59 000001I|--/--/-/---|=2:2176=A dynamic patch has been installed for TEL
23/08/05 17:48:11 000001I|--/--/-/---|=2:2176x007=A dynamic patch has been installed for TEL
23/08/05 17:48:11 000001I|--/--/-/---|=4:0260=Beginning of downloading binloaderio1n
23/08/05 17:48:11 000001I|--/--/-/---|=5:0261=End of downloading binloaderio1n
23/08/05 17:48:47 000001I|00/28/-/---|=4:0260=Beginning of downloading binio1n
23/08/05 17:48:56 000001I|00/28/-/---|=5:0261=End of downloading binio1n
23/08/05 17:48:56 000001I|00/28/-/---|=4:0260=Beginning of downloading tonesnv
23/08/05 17:48:56 000001I|00/28/-/---|=5:0261=End of downloading tonesnv
23/08/05 17:48:56 000001M|--/--/-/---|=5:2009=Initialisation CPU role MAIN
23/08/05 17:48:56 000001M|--/--/-/---|=5:2019=UA_FICTIF coupler commissioning
23/08/05 17:48:56 000001M|--/--/-/---|=5:2141=SET resources quantity normal
23/08/05 17:48:56 000001M|--/--/-/---|=5:1367=DECT network initialization
23/08/05 17:48:56 000001M|--/--/-/---|=5:5904=Remote extension network initialization
23/08/05 17:48:56 000001M|--/--/-/---|=4:0425=PRS related activity : Interface handler started
23/08/05 17:49:27 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:49:27 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:49:27 000001M|--/--/-/---|=2:2701=Software package Error 3 info2 -1 info3 -1
23/08/05 17:51:28 000001M|19/01/-/---|=5:2019=INTIPA coupler commissioning
23/08/05 17:52:45 000001M|--/--/-/---|=3:1125=external alarm : "mtcl login"
23/08/05 17:52:47 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:52:54 000001M|--/--/-/---|=2:2650=SQL error: appli MAO_AGENT table No 2650 error -25000
23/08/05 17:52:55 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli MAO_AGENT oper 30 err -1
23/08/05 17:53:25 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli MAO_AGENT oper 30 err -1
23/08/05 17:55:32 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:55:32 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:55:32 000001M|--/--/-/---|=2:2701=Software package Error 3 info2 -1 info3 -1
23/08/05 17:57:28 000001M|--/--/-/---|=2:2166=CPU requires Reset CPL IO1 (0,28) Cause 0
23/08/05 17:57:30 000001M|--/--/-/---|=1:2077=CPU was halted due to a shutdown
23/08/05 17:57:47 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli MAO_AGENT oper 30 err -1
23/08/05 17:57:47 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli BROADCAST oper 18 err 15
23/08/05 17:57:48 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli EVENTMON oper 28 err -10
23/08/05 17:57:48 000001M|--/--/-/---|=3:4076=PBM : signal 15 caught
23/08/05 17:57:49 000001M|--/--/-/---|=2:0275=ACCOUNTING: Appli ACC_CHECK_FILES : feature incident 20 15
--------------------------------------------
BIOS Version 3BA_24095_AAAB_06
Generated on fillld0f00258 on Dec/17/2004 at 10:10
CPU6 Step 2 version 3BA 23197 : 0.1 ***
*** ELAN SC520 @ 100MHz
System Times
CLK Time : Mon Aug 29 13:21:49 2005
Analyzing the input file
----- Auto Boot in 5 s ----- ----- Auto Boot in 4 s -----
----- Auto Boot in 3 s ----- ----- Auto Boot in 2 s ----- ----- Auto Boot in 1 s -----
---- Too late now ----no switch back.
GRUB version 0.5.96 (640K lower / 130048K upper memory)Press enter to boot the default OS [0], 'c' for a command-line,or give an another entry number [0]: Boot GNU/Linux [default] [1]: Install GRUB into the hard disk the default entry [0] will be booted automatically in 5 seconds.
the default entry [0] will be booted automatically in 4 seconds.
the default entry [0] will be booted automatically in 3 seconds.
the default entry [0] will be booted automatically in 2 seconds.
the default entry [0] will be booted automatically in 1 seconds.
Booting 'Boot GNU/Linux [default]'root (hd0,4)kernel /boot/vmlinuz root=/dev/hda5 console=ttyS0,9600 panic=5 [Linux-bzImage, setup=0xa00, size=0x9f2e4]Added 4 region for memory mapBootinfo src = 0x0 Bootinfo dst = 0xc0107000
Linux version 2.4.1-ll-dhs3 (infrafox@cb100s006) (gcc version 2.95.2 19991024 (release)) #1 Tue Mar 29 11:55:20 MEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 00000000000a0000 @ 0000000000000000 (usable)
BIOS-e820: 0000000000020000 @ 00000000000a0000 (reserved)
BIOS-e820: 0000000007f00000 @ 0000000000100000 (usable)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda5 console=ttyS0,9600 panic=5
Initializing CPU#0
Calibrating delay loop... 49.35 BogoMIPS
Memory: 126640k/131072k available (944k kernel code, 4048k reserved, 387k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Cpu type: CPU6s2
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 00000001 00000000 00000000, vendor = 2
CPU: After vendor init, caps: 00000001 00000000 00000000 00000000
CPU: After generic, caps: 00000001 00000000 00000000 00000000
CPU: Common caps: 00000001 00000000 00000000 00000000
CPU: AMD 486 DX/4-WB stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 84109kB/28036kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hd0: C/H/S=16383/16/0 from BIOS ignored
hda: TOSHIBA MK2023GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors (20004 MB), CHS=38760/16/63
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17 >
Serial driver version 5.02 (2000-08-09) with SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 11) is a 16550A
ttyS03 at 0x02e8 (irq = 13) is a 16550A
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.3 Ben Greear <greearb@candelatech.com>
vlan Initialization complete.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 176k freed
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting Welcome to Linux Mandrake
Press 'I' to enter interactive startup.
Mounting proc filesystem [ OK ]
Configuring kernel parameters: [ OK ]Setting clock (utc): Mon Aug 29 15:22:15 CEST 2005 Mon Aug 29 15:22:15 CEST 2005
[ OK ]Activating swap partitions: [ OK ]Setting hostname xa000000: [ OK ]Checking root filesystem
DHS3ROOT: clean, 15657/128016 files, 106858/512032 blocks
[ OK ]Remounting root filesystem in read-write mode: [ OK ]Finding module dependencies /etc/rc.sysinit(1): Finding module dependencies
[ OK ]Checking filesystems
DHS3ROOT2: clean, 11/128016 files, 16169/512032 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3BIN: clean, 1454/128256 files, 73913/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3DATA: clean, 3722/128256 files, 44903/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3DYN: clean, 455/544000 files, 30183/1086238 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3BIN2: clean, 11/128256 files, 4039/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3DATA2: clean, 11/128256 files, 4039/256024 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3EXT: clean, 140/256512 files, 33798/512056 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3VAR: clean, 163/102800 files, 18819/409601 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Checking filesystems
DHS3VAR2: clean, 11/102800 files, 12991/409601 blocks
/etc/rc.sysinit(1): Checking filesystems
[ OK ]Mounting local filesystems /etc/rc.sysinit(1): Mounting local filesystems
[ OK ]Checking loopback filesystems
/etc/rc.sysinit(1): Checking loopback filesystems
[ OK ]Mounting loopback filesystems: /etc/rc.sysinit(1): Mounting loopback filesystems:
[ OK ]Enabling swap space: /etc/rc.sysinit(1): Enabling swap space:
[ OK ]
INIT: Entering runlevel: 3Entering non-interactive startup
Starting dhs3mod: Loading Alcatel-specific modules: /etc/rc3.d/S02dhs3mod(1): dhs3mod startup
[ OK ]/etc/rc.d/rc(1): Starting dhs3mod:
[ OK ]Starting eva: Loading Alcatel-EVA modules: /etc/rc3.d/S02eva(1): eva startup
[ OK ]/etc/rc.d/rc(1): Starting eva:
[ OK ]Starting kdebug services: new debug mode: dump
/etc/rc3.d/S02kdebug(1): Starting kdebug services:
[ OK ]Starting watchdog: Starting watchdog services:
/etc/rc.d/rc(1): Starting watchdog:
[ OK ]Remove not allowed accounts: /etc/rc3.d/S09security(1): Remove not allowed accounts:
[ OK ]Setting network parameters: /etc/rc3.d/S10network(1): Setting network parameters:
[ OK ]Bringing up interface lo: /etc/rc3.d/S10network(1): Bringing up interface lo:
[ OK ]Enabling IPv4 packet forwarding /etc/rc3.d/S10network(1): Enabling IPv4 packet forwarding
[ OK ]Bringing up interface eth0: /etc/rc3.d/S10network(1): Bringing up interface eth0:
[ OK ]Starting netadmin: /etc/rc.d/rc(1): Starting netadmin:
[ OK ]Starting netadmind: /etc/rc.d/rc(1): Starting netadmind:
[ OK ]Initializing random number generator: /etc/rc3.d/S20random(1): Initializing random number generator:
[ OK ]Starting gwlinuxfifo: Creation de la fifo:
/etc/rc.d/rc(1): Starting gwlinuxfifo:
[ OK ]Starting system logger: /etc/rc3.d/S30syslog(1): syslogd startup
[ OK ]Starting kernel logger: /etc/rc3.d/S30syslog(1): klogd startup
[ OK ]Starting dhslog: Loading Alcatel-specific log functionality: /etc/rc3.d/S31dhslog(1): dhslog startup
[ OK ]/etc/rc.d/rc(1): Starting dhslog:
[ OK ]Starting at daemon: /etc/rc3.d/S40atd(1): atd startup
[ OK ]Starting cron daemon: /etc/rc3.d/S40crond(1): crond startup
[ OK ]Starting xinetd: /etc/rc3.d/S56xinetd(1): xinetd startup
[ OK ]Starting kheader: /etc/rc.d/rc(1): Starting kheader:
[ OK ]Loading chorus/mix emulation layer:/etc/rc3.d/S98emulation(1): S98emulation
[ OK ]
Linux Mandrake for eMediate release 7.2 (Odyssey) for i486
Kernel 2.4.1-ll-dhs3 on an i486 / ttyS0
xa000000 login: Linux Mandrake for eMediate release 7.2 (Odyssey) for i486
Kernel 2.4.1-ll-dhs3 on an i486 / ttyS0
xa000000 login: mtcl
Password:
Last login: Tue Aug 23 18:00:39 on ttyS1
Alcatel OmniPCX Enterprise
standard installation last performed: 25-May-2005 16:55:35
(E)xa000000> incvisu
23/08/05 17:46:35
23/08/05 17:46:51 000001I|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:46:52 000001I|--/--/-/---|=2:2700x002=Software package Error 1 info2 -1 info3 -1
23/08/05 17:46:52 000001I|--/--/-/---|=2:2700=Software package Error 4 info2 2 info3 -1
23/08/05 17:46:57 000001I|--/--/-/---|=4:2199=A4400 Version : R6.1-f2.500-6-i-ng-c6s2
23/08/05 17:46:59 000001I|--/--/-/---|=2:4351=Incoherent data: appli INITREM table ENTITY cause 0 info -1 -1 -1
23/08/05 17:46:59 000001I|--/--/-/---|=2:4351=Incoherent data: appli INITREM table ENTITY cause 1 info -1 -1 -1
23/08/05 17:47:59 000001I|--/--/-/---|=2:2176=A dynamic patch has been installed for TEL
23/08/05 17:48:11 000001I|--/--/-/---|=2:2176x007=A dynamic patch has been installed for TEL
23/08/05 17:48:11 000001I|--/--/-/---|=4:0260=Beginning of downloading binloaderio1n
23/08/05 17:48:11 000001I|--/--/-/---|=5:0261=End of downloading binloaderio1n
23/08/05 17:48:47 000001I|00/28/-/---|=4:0260=Beginning of downloading binio1n
23/08/05 17:48:56 000001I|00/28/-/---|=5:0261=End of downloading binio1n
23/08/05 17:48:56 000001I|00/28/-/---|=4:0260=Beginning of downloading tonesnv
23/08/05 17:48:56 000001I|00/28/-/---|=5:0261=End of downloading tonesnv
23/08/05 17:48:56 000001M|--/--/-/---|=5:2009=Initialisation CPU role MAIN
23/08/05 17:48:56 000001M|--/--/-/---|=5:2019=UA_FICTIF coupler commissioning
23/08/05 17:48:56 000001M|--/--/-/---|=5:2141=SET resources quantity normal
23/08/05 17:48:56 000001M|--/--/-/---|=5:1367=DECT network initialization
23/08/05 17:48:56 000001M|--/--/-/---|=5:5904=Remote extension network initialization
23/08/05 17:48:56 000001M|--/--/-/---|=4:0425=PRS related activity : Interface handler started
23/08/05 17:49:27 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:49:27 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:49:27 000001M|--/--/-/---|=2:2701=Software package Error 3 info2 -1 info3 -1
23/08/05 17:51:28 000001M|19/01/-/---|=5:2019=INTIPA coupler commissioning
23/08/05 17:52:45 000001M|--/--/-/---|=3:1125=external alarm : "mtcl login"
23/08/05 17:52:47 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:52:54 000001M|--/--/-/---|=2:2650=SQL error: appli MAO_AGENT table No 2650 error -25000
23/08/05 17:52:55 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli MAO_AGENT oper 30 err -1
23/08/05 17:53:25 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli MAO_AGENT oper 30 err -1
23/08/05 17:55:32 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:55:32 000001M|--/--/-/---|=2:2700=Software package Error 1 info2 -1 info3 -1
23/08/05 17:55:32 000001M|--/--/-/---|=2:2701=Software package Error 3 info2 -1 info3 -1
23/08/05 17:57:28 000001M|--/--/-/---|=2:2166=CPU requires Reset CPL IO1 (0,28) Cause 0
23/08/05 17:57:30 000001M|--/--/-/---|=1:2077=CPU was halted due to a shutdown
23/08/05 17:57:47 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli MAO_AGENT oper 30 err -1
23/08/05 17:57:47 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli BROADCAST oper 18 err 15
23/08/05 17:57:48 000001M|--/--/-/---|=0:2663=IPC Chorus err: appli EVENTMON oper 28 err -10
23/08/05 17:57:48 000001M|--/--/-/---|=3:4076=PBM : signal 15 caught
23/08/05 17:57:49 000001M|--/--/-/---|=2:0275=ACCOUNTING: Appli ACC_CHECK_FILES : feature incident 20 15
Posted: 29 Aug 2005 13:39
When it says "AUTOBOOT IN #s" , just press a key 
Posted: 28 Sep 2005 10:31
i tried the above procedure. now i am getting error no coff file.
-----------------------------------------------------------------------------------Boot Menu :
1 - Booting From Floppy £0
2 - Booting From Floppy £1
3 - Booting From Hard Disk £0
4 - Booting From Hard Disk £1
5 - Booting From Ethernet Network
6 - Default Boot Sequence
CPU6 A> 5
Booting From Ethernet Network
Updating bootinfo
ACT4400 specific INSTALLATION data input:
=========================================
Standard installation (y/n, default is y) ? :y
TEL version ? : f2500
Phase 1: address determination and bootfile selection
=====================================================
NB: All parameters below are optionnal.
Default internet Address : *** Unknown ***
New Internet Address : 192.168.1.223
Name of default BOOTP/TFTP server : *** Unknown ***
Name of a new BOOTP/TFTP server : 192.168.1.222---------------pc ipaddress
Default loaded file :
New loaded file : c:/DHS3mgr/f2500/dhs3linux/comm/cpiofile
BOOTP request in progress ............
Netmask : 255.255.255.0
Our Hostname : OXE_1 (192.168.1.223)
TFTPLOAD STARTED - Server TELECOM - File Name c:/DHS3mgr/f2500/dhs3linux/comm/cp
iofile
Not a COFF file.
Status : cNotOK
Boot Menu :
1 - Booting From Floppy £0
2 - Booting From Floppy £1
3 - Booting From Hard Disk £0
4 - Booting From Hard Disk £1
5 - Booting From Ethernet Network
6 - Default Boot Sequence
CPU6 A>
-----------------------------------------------------------------------------------Boot Menu :
1 - Booting From Floppy £0
2 - Booting From Floppy £1
3 - Booting From Hard Disk £0
4 - Booting From Hard Disk £1
5 - Booting From Ethernet Network
6 - Default Boot Sequence
CPU6 A> 5
Booting From Ethernet Network
Updating bootinfo
ACT4400 specific INSTALLATION data input:
=========================================
Standard installation (y/n, default is y) ? :y
TEL version ? : f2500
Phase 1: address determination and bootfile selection
=====================================================
NB: All parameters below are optionnal.
Default internet Address : *** Unknown ***
New Internet Address : 192.168.1.223
Name of default BOOTP/TFTP server : *** Unknown ***
Name of a new BOOTP/TFTP server : 192.168.1.222---------------pc ipaddress
Default loaded file :
New loaded file : c:/DHS3mgr/f2500/dhs3linux/comm/cpiofile
BOOTP request in progress ............
Netmask : 255.255.255.0
Our Hostname : OXE_1 (192.168.1.223)
TFTPLOAD STARTED - Server TELECOM - File Name c:/DHS3mgr/f2500/dhs3linux/comm/cp
iofile
Not a COFF file.
Status : cNotOK
Boot Menu :
1 - Booting From Floppy £0
2 - Booting From Floppy £1
3 - Booting From Hard Disk £0
4 - Booting From Hard Disk £1
5 - Booting From Ethernet Network
6 - Default Boot Sequence
CPU6 A>
Posted: 28 Sep 2005 12:34
the problem solved. thanx vad