Alcatel Unleashed

Hi to all,

anybody has worked with mp-202? I have configured them , they are able to receive calls from internal and external user(sda), but when i try to make a call from mp202 there is a silence and after 20 seconds the coll go to attendant


Thank you in advance

I think that there are some Interworking Reports with Audiocodes gateways on ABPS. Search for them.

Regard.

What configuration are you using? Two MP-202's using the SIP image or one MP-202 connecting to the OXE using SIP trunking?

When using two MP-202's (one fxo and one fxs) you must configure the dial plan on both devices properly or you can get this kind of behavior. I would double check your configuration on both devices to make sure you are routing the correct numbers to the correct IP's in both directions.

If using one MP-202 connecting to OXE with SIP trunking I am no help, have not done this yet. If this is the case check the pastebin, I uploaded the doc.

Well, I tried to upload it to the pastebin, but I keep getting an error.

Could not upload attachment to ./files/1778_c1e7e88330afcdf7169012a397e6254c.

Frank? Are others having problems uploading files since the conversion? Probably a problem between the chair and the computer, but I don't have a service contract

Yes torrentula, there is a problem, i tried to check but no access to shell (yet )
Will contact Frank as soon as I can so he can check it, however he is on personal business right now so I don't think that will be a good time any soon.

cavagnaro wrote:Yes torrentula, there is a problem, i tried to check but no access to shell (yet )
Will contact Frank as soon as I can so he can check it, however he is on personal business right now so I don't think that will be a good time any soon.

How soon doesn't even depend on him anymore

well that is another history

I was just trying to figure out whether I was drunk or there really was a problem

Thanks to all for help.

i'm using one MP202 CONNECTED TO OXE (rel. 8.0-g1-302-6-e)- App. server

Barone,

Did you get this going? I have the doc and can paste it now that Frank has fixed the problem.

Let me know if you still need it.

T