How install DECT station
How install DECT station
Hi everybody I'm new on this forum so I would like to welcome eweryone. I have question about DECT station. I don't now how create new DECT station in OXE. Pleas give mi few hint. I read documentation but I found only text about phisical connection. Thanks
Re: How install DECT station
hi
these are the steps
mgr/Users/Create -->
x Node Number (reserved) : 1 x
x Directory Number : 978 x
x x
x Directory name : test2 x
x Directory First Name : -------------------- x
x Location Node : 1 x
x Shelf Address : 255 x
x Board Address : 255 x
x Equipment Address : 255 x
x Set Type + GAP + x
x Entity Number : 1 x
x Set Function + Default x
x Profile Name : --------------- x
x Key Profile + None x
x Identifier of Domain : 0 x
x Language Id. : 3
x x
x Secret Code : **** x
x Confirm : **** x
after creating do command
(1)xa000001> dectsets
you should get something like that
Neqt=01038 Nbr=978 IPEI=00007360007414 TSC UA V01.51 PLI 30
use command " dectinston <ext. No.> " to install the dect set.
no specific base station is needed.
open the dect set and press ok for everething the dect 'ask' you.
let me know if you need any more help
good luck
these are the steps
mgr/Users/Create -->
x Node Number (reserved) : 1 x
x Directory Number : 978 x
x x
x Directory name : test2 x
x Directory First Name : -------------------- x
x Location Node : 1 x
x Shelf Address : 255 x
x Board Address : 255 x
x Equipment Address : 255 x
x Set Type + GAP + x
x Entity Number : 1 x
x Set Function + Default x
x Profile Name : --------------- x
x Key Profile + None x
x Identifier of Domain : 0 x
x Language Id. : 3
x x
x Secret Code : **** x
x Confirm : **** x
after creating do command
(1)xa000001> dectsets
you should get something like that
Neqt=01038 Nbr=978 IPEI=00007360007414 TSC UA V01.51 PLI 30
use command " dectinston <ext. No.> " to install the dect set.
no specific base station is needed.
open the dect set and press ok for everething the dect 'ask' you.
let me know if you need any more help
good luck
Re: How install DECT station
Thanks for Your answer. But I wrong describe my problem. I have problem with instalation IBS base station (no DECT station) sorry form my mistake. Did You know how install new IBS base station in OXE?
Re: How install DECT station
ok no problem
first you go
mgr/Dect System --> Radio base type + IBS
then
mgr/Dect System/IBS System --> Pari Value : 10000400004
then
mgr/shelf --> Pari Number + Pari IBS
then
mgr/Shelf/Board/IBS/Create -->
lqConsult/Modify: IBSqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x x
x Node Number (reserved) : 1 x
x Shelf Address : 1 x
x Board Address : 1 x
x Equipment Address : 14 x
x x
x Radio Part Number : 0 x
x Location Area : 0 x
x Location name : -------- x
x Line delay + Short line (0-400M) x
x Number of UA link : 2 x
x IBS generation + IBS 2G x
x Antenna diversity + YES x
x Odd slots + YES x
x Base in noisy audio environment + NO x
x x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
NOTE allways programm ibs stations in even position on board e.g. 0,2,4,6,....
good luck again!!!
first you go
mgr/Dect System --> Radio base type + IBS
then
mgr/Dect System/IBS System --> Pari Value : 10000400004
then
mgr/shelf --> Pari Number + Pari IBS
then
mgr/Shelf/Board/IBS/Create -->
lqConsult/Modify: IBSqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x x
x Node Number (reserved) : 1 x
x Shelf Address : 1 x
x Board Address : 1 x
x Equipment Address : 14 x
x x
x Radio Part Number : 0 x
x Location Area : 0 x
x Location name : -------- x
x Line delay + Short line (0-400M) x
x Number of UA link : 2 x
x IBS generation + IBS 2G x
x Antenna diversity + YES x
x Odd slots + YES x
x Base in noisy audio environment + NO x
x x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
NOTE allways programm ibs stations in even position on board e.g. 0,2,4,6,....
good luck again!!!
Re: How install DECT station
Thanks for Your help. Now everything working good. Best regards
Re: How install DECT station
when i install it the dect says accepted but on the dect display there is nothing? Anyone who knows about this problem i need help!
Re: How install DECT station
hi , are you folowing the "dectinston " command ?