Problem with analog ports

[Batab_DUP]

Greetings!

I have a OXO Rack2 CPU-4 with AMIX 4/8/4-1 and AMIX 4/4/4-1 Rls 700/012.005. The OXO is new and what happens next, after setting the OXO, all analog ports stop working.

On OMC /suscribers everything appears correct, but to lift the phone is not heard nothing.
If a digital extension call to analog, is still ringing despite the user picks up the phone. If analog extension try to make a call, there is no tone and is impossible conect to another user.
I made a Lola, reconfigure and the same problem occurs. Someone had a similar problem with some ports?

Thanks in advanc!

[tuxalize]

Yes, I had two cases:
In one of them it was bad board.
In another it was power supply.

In your case I guess it is bad board, because of the current detector circuits are not working, i.e., when you call a SLI terminal you hear it is calling even after you pick the call on SLI.

Regards,
Tux

[Batab_DUP]

Thank you very much, I did the following:

After Lola, I put the penultimate database and probe ports, these worked well, since there again configure and I have not been presented with the problem again.

I made a call to a colleague told him the problem and gave me the tip, he had a similar problem and solved it that way. I´ll observe the performance of the cards this week, thank you again.