Alcatel Unleashed

Hi experts,

I'm having trouble with my two digital phones connected to the board. I just want to clarify something. on my OXO i have an AMIX 4/8/4-I and CPU-3m. Just want to clarify if AMIX 4/8/4-I need to be connected with a cross-over cable to the CPU-3m? If it is so, which port shall i connect the cable from CPU-3m to AMIX 4/8/4-I??


thanks,

NOOOOOOOOOOOOO......

Make Smoke if you do that! (48VDC straight onto network switch!)

The AMIX 4/8/4 is an analog trunk card(4)/Digital Extension(8)/Analog Extension(8) card. All comms is via the backplane of the cabinet to the CPU.

The cross-over is between the CPU and your PC!

the cross over cable is for configuring the PABX. (connection between your PC and the CPU LAN)

I see. thanks