Alcatel Unleashed

On OXO startup, the CPU goes into some cyclic procedure. The FAN never comes on. The system starts ok with another CPU. Any idea how to go about this?

Amumar12

Remove for a few minutes battery from CPU card

This is how I deal with this kind of problems: (which by the way ocure in the following sequence of events: powefailure, OXO stays on battery, shut down by itself, on battery low, power on, booting, while booting 2nd powerfailure )

First you can try to unplug the power cable from the back of the PBX while booting the system. This equivalates as I remarqued with a cold reset. After that (if it works) you can start up the system from the beginning and then restore a backup database.

If this doesn't work you must use LOLA to upload a new OS (must be the same release as the preavious) into the OXO. See the documentation related to this (not very simple but not very hard eather). Then backup restore.

I've the same problem by a Partner and the CPU is defect.
We have trying with Lola and the CPU don't accept the file transfer.
I think you need to contact your reseller to change the CPU.