Alcatel Unleashed

hi all,

i install MAC59 on windows xp and also BLF. and in OXE Rel 8 i creat operator set as MAC59. and i gave the shelf board and port location and connected to system MAc59 working fine but blf is not working it's giving message no source network cable also connected and in blf setting access i selected com1 and mac59 is it ok or there is some other setting waiting for you help

Regards.

Not remember exactly but some times ago was the same problem.
4059 have "internal mini-BLF" feature. And you can use external (full) BLF. But not in the same time.
Us I remember I forbin internal BLF.
But not sure. It was many time ago

i also disable min blf from services is it same way or from some other place i have to disable it

Not remember - may be during 4059 installation you have possibility to select need or not internal BLF feature?

I think in 4059 configuration parameters must exist option for "mini-BLF" feature disable.

mini-BLF is free. Big BLF (install separately to 4059 - but on the same CD) is licensed on OXE

yes both are installed seprately and there is license for blf

what version you installed?

Can you paste your Attendant config on here?

Check the OPS using cfgUpdate and look for parameter 43 Number of BLF.
The integrated half BLF can (and must) be disabled in the A4059 configuration menu. The integrated half BLF also doesn't support supervision of stations in a network!

thanks for all of you it's working fine