Alcatel Unleashed

As far as I know it is not possible to connect a sip user to OXO. However, I was wondering if I can use external proxy server or maybe connect the phone in another way ?
Thanks

Possibly I believe you can use SIP users on an OXO with an ECS. Yet to try it out in the office tho.

I have been doing a bit of playing and it does seem to be possible to connect a SIP device to the OXO without a registrar. ill be working as and when i can on till next week and ill upload a guide.

So far here is rough guide of my management:
-VOIP parameters: Protcol - SIP, create channels for SIP trunk.
-create SIP trunk
-setup internal numbering so called internal number hits ARS with NMT set to keep and private.
-create ARS route for called private number and client IP as SIP gateway
-create private numbering plan for internal subscribers
-setup SIP softphone with domain/proxy with IP@ of VOIP master.

More to follow...

Oxosaysno wrote:I have been doing a bit of playing and it does seem to be possible to connect a SIP device to the OXO without a registrar. ill be working as and when i can on till next week and ill upload a guide.

So far here is rough guide of my management:
-VOIP parameters: Protcol - SIP, create channels for SIP trunk.
-create SIP trunk
-setup internal numbering so called internal number hits ARS with NMT set to keep and private.
-create ARS route for called private number and client IP as SIP gateway
-create private numbering plan for internal subscribers
-setup SIP softphone with domain/proxy with IP@ of VOIP master.

More to follow...

Thanks for the help
So far so good, is there anything else or should I try it on ?

jopatini wrote:

Oxosaysno wrote:I have been doing a bit of playing and it does seem to be possible to connect a SIP device to the OXO without a registrar. ill be working as and when i can on till next week and ill upload a guide.

So far here is rough guide of my management:
-VOIP parameters: Protcol - SIP, create channels for SIP trunk.
-create SIP trunk
-setup internal numbering so called internal number hits ARS with NMT set to keep and private.
-create ARS route for called private number and client IP as SIP gateway
-create private numbering plan for internal subscribers
-setup SIP softphone with domain/proxy with IP@ of VOIP master.

More to follow...

Thanks for the help
So far so good, is there anything else or should I try it on ?

Hello

Any news about the guide ?
Did it work for you ?

This project is on hold for now. I got communication between the SIP and IP phones but not UA or Z sets not sure why though.

Alcatel may be best to give official technical answer, best log an SR if you are a business partner.