SIP TRUNK

If you wrote a good one, share it with us !
talkhalidi

SIP TRUNK

Post by talkhalidi »

Hi All,

i have setup SIP trunk with Avaya system. i just cannot call Avaya extensions from Alcatel IP Phone. once called the number i get congestion and as per traces on Avaya , the call did not land on the trunk group of Avaya.

i have setup the routing plan and prefix plan as follow

57
route number
trunk group sip 2
subnet network 2


please tell me how i can trace the call made by Alcatel Phone on alcatel system ? how do i setup the dial plan ?


once i
cavagnaro

Re: SIP TRUNK

Post by cavagnaro »

Please read the documentation, all your questions are detailed in there.
talkhalidi

Re: SIP TRUNK

Post by talkhalidi »

ok fine my dear i dont mind i have been looking in the document, actually the structure of document not that good. comparing Cisco and avaya Docs which is give you over all how to administer Dail PLan , then ARS , fAC.

i have followed an Example in document to setup the trunking between the 2 system , and again it did not work.

could you direct me where in document show you how to setup dial plan for whole system . normally as telecom i need the following

-1 define extensions range
2- define group extenion range
3- feature codes
4- ars list
5- AAR range


im not intrested to know now the ARS server if i have multiple alcatel nodes, in simple i want to setup the PBX later on i want to go into details and features.


how i can trace the call made by the phone? and how i can capture the SIP log please? i have been stuggle looking into document since 1 week and no luck to make the trunk call the other side.
root

Re: SIP TRUNK

Post by root »

talkhalidi wrote:Hi All,

i have setup SIP trunk with Avaya system. i just cannot call Avaya extensions from Alcatel IP Phone. once called the number i get congestion and as per traces on Avaya , the call did not land on the trunk group of Avaya.

i have setup the routing plan and prefix plan as follow

57
route number
trunk group sip 2
subnet network 2


please tell me how i can trace the call made by Alcatel Phone on alcatel system ? how do i setup the dial plan ?


once i
poste your config and we could have a look
talkhalidi

Re: SIP TRUNK

Post by talkhalidi »

ok here the config below

OXE IP = 192.168.254.240
AVAya IP = 192.168.254.200

SIP Trunk 1 = OXE, Subnet work 1 = OXE
SIP Trunk 2 = Avaya , Subnetwork 2 = Avaya
OXE users Extensions 201, 203, 2xx range
Avaya Extensions range 5702 ,6101 , 6xxxx range

i have configured prefix plan for 57xx , 6xxx to be 2 subnetwork, trunk 2, 4 digits.

below the trace for call trial made from extension 201 on OXE to avaya extensions 6101 . please find attached SIP trace
You do not have the required permissions to view the files attached to this post.
talkhalidi

Re: SIP TRUNK

Post by talkhalidi »

i have posted the config and traces , however, it seems that it takes 2 days here to approve or not approve the post?!!!!

where is the admin for this forum?
cavagnaro

Re: SIP TRUNK

Post by cavagnaro »

In holidays...are you happy master?
cavagnaro

Re: SIP TRUNK

Post by cavagnaro »

talkhalidi wrote:ok here the config below

OXE IP = 192.168.254.240
AVAya IP = 192.168.254.200

SIP Trunk 1 = OXE, Subnet work 1 = OXE
SIP Trunk 2 = Avaya , Subnetwork 2 = Avaya
OXE users Extensions 201, 203, 2xx range
Avaya Extensions range 5702 ,6101 , 6xxxx range

i have configured prefix plan for 57xx , 6xxx to be 2 subnetwork, trunk 2, 4 digits.

below the trace for call trial made from extension 201 on OXE to avaya extensions 6101 . please find attached SIP trace
You are receiving error 488, check the codecs on both sides.
root

Re: SIP TRUNK

Post by root »

talkhalidi wrote:ok here the config below

OXE IP = 192.168.254.240
AVAya IP = 192.168.254.200

SIP Trunk 1 = OXE, Subnet work 1 = OXE
SIP Trunk 2 = Avaya , Subnetwork 2 = Avaya
OXE users Extensions 201, 203, 2xx range
Avaya Extensions range 5702 ,6101 , 6xxxx range

i have configured prefix plan for 57xx , 6xxx to be 2 subnetwork, trunk 2, 4 digits.

below the trace for call trial made from extension 201 on OXE to avaya extensions 6101 . please find attached SIP trace
Your problem is in the OXE config part, the trace show that the OXE send the INVITE to
the OXE itself and response 488.

Please post following config snips (copy/paste from mgr)

- content of routing no. 6xxx
- content of network routing table 2
- content of sip ext. gateway 2
talkhalidi

Re: SIP TRUNK

Post by talkhalidi »

thanks ,

i have attached the configuration of OXE. please note that the IP address for OXE is 192.168.254.240 , AVAYA 192.168.254.200.


am stuck since one week and couldnot find clue for my proble. appreciate your help guys.
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “Documentation”