Page 1 of 1
Connection to OXO with OMC
Posted: 04 Feb 2009 09:29
by thatawa
Hello,
i cannot connect to OXO with OMC 700.17.1.a throught lan, i have this message:
Code: Select all
HTTPS [login.4]-Soaplogin error -Error Code Aucune connectionn'a pu etre etablie car l 'ordinateurcible l a expressement refusée
I can "ping" the OXO, and I know I have the good password because I can connect with V24.
I have installed OMC 700.17.1.b and the problem is the same.
I have de-activated firewall and AntiVirus and the problem is the same.
==> But with another administrator session (I am administrator too on the other session!) to my computer, I can connect with LAN !!!
Has someone any ideas why ??
Thanks.
Re: Connection to OXO with OMC
Posted: 04 Feb 2009 10:05
by bouncer_ie
under LAN/IP config what is the default router address set to? For reasons unknown sometimes this has to be set up even when you are connecting over the same LAN.
Re: Connection to OXO with OMC
Posted: 06 Feb 2009 08:07
by thatawa
thank you for your answer.
I configure my network lan with 192.168.92.10, mask 255.255.255.0.
With or without default router address 192.168.92.1 ; the problem is still the same.
Another idea ??
Re: Connection to OXO with OMC
Posted: 06 Feb 2009 13:08
by tot3nkopf
Disable any VLAN ID if configured.
Re: Connection to OXO with OMC
Posted: 06 Feb 2009 16:59
by thatawa
No Vlans configured !!!
Re: Connection to OXO with OMC
Posted: 09 Feb 2009 09:24
by tot3nkopf
Seen this once or twice. Reinstall software with LoLa. The issue will be cleared.
Re: Connection to OXO with OMC
Posted: 11 Feb 2009 10:30
by thatawa
tot3nkopf wrote:Seen this once or twice. Reinstall software with LoLa. The issue will be cleared.
I m not to understand what you are telling me, which software? Oxo software version or OMC ?
Because, I can connect by LAN with another session on my computer, so i don't need to reinstall the oxo version...
Re: Connection to OXO with OMC
Posted: 11 Feb 2009 15:35
by tot3nkopf
Missed the part with other login you can connect without problem.
This means the problem lays with your account policy. So this is not an OXO problem.
Re: Connection to OXO with OMC
Posted: 12 Feb 2009 15:13
by thatawa
just a "up"
Re: Connection to OXO with OMC
Posted: 19 Feb 2009 18:12
by bouncer_ie
bouncer_ie wrote:under LAN/IP config what is the default router address set to? For reasons unknown sometimes this has to be set up even when you are connecting over the same LAN.
For clarity. I mean LAN/IP config of the OXO. i.e. Harware & Limits/LAN / IP Configuration.
Can you connect using a V24 cable? (get a cisco console cable (light blue cable rj-45 on one end v.24 on the other) and reverse the RJ45 head i.e. take off the one on it and put on a new one). Connect this cable to the console port on the CPU and choose local v.24 as your connection method