Page 1 of 1
Microphone sensitivity when handfree on 4020
Posted: 07 Jul 2004 13:59
by frank
Well..
Here is a good one: I am on site, and the customer complain about the 4020s being too sensitives. There is a AC that's ON all the time and make a huge noise. I just opened a trouble ticket with NOC, because I don't know what to change under System / UA audio parameters
Posted: 08 Jul 2004 17:47
by frank
4035T..?
What's that model, I never heard about it.
Actually, the NOC talked to me about parameters to change in
MGR / System / UA Audio Parameters
or something like that. It's a very sensitive parameter because it affect all UA boards. I will make some test and will let you know. I will also try to get a 4035T free for 'test' and see if it changes anything. Thanks for the trick !
PS: Do you like this idea of forums ?
Posted: 08 Jul 2004 18:22
by sshynk
Not sure what the actual model number (manufacture code) was. That was 4-5 months ago.
Love the forum. Great place to share ideas and ask questions !!
Posted: 19 Jul 2004 13:05
by frank
Okay, here is my solution: I had an answer from Alcatel giving me a lot of information about those system parameters that we should not change. So I spoke with the customer that did agree on change the phone location from under the AC to another part of the room, and then it worked ...