My Teamwork routing tables
Posted: 25 Feb 2009 10:02
In a new myT new installation I couldn't reach internet (nor LAN network) from VMware Win XP machine. So MSOffice is not able to be activated. I couldn't do a ping from VMware Win XP machine either.
Using System Commands options from MyT Web Admin page, I've seen the vmnet1 interface is not using a right gateway address (it should be i think 192.168.254.1 which corresponds to default gateway inside to WIN XP Vmachine)
I'm using the default values for Collaboration Subnet (192.168.254.0) and my LAN subnet is 192.168.1.0/24
Do you know if is possible to configure vmnet1 Gateway?
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt
10.254.254.0 * 255.255.255.0 U 0 0 0 eth1 0 0 0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 0 0 0
192.168.254.0 * 255.255.255.0 U 0 0 0 vmnet1 0 0 0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 0 0 0
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0 0 0
Using System Commands options from MyT Web Admin page, I've seen the vmnet1 interface is not using a right gateway address (it should be i think 192.168.254.1 which corresponds to default gateway inside to WIN XP Vmachine)
I'm using the default values for Collaboration Subnet (192.168.254.0) and my LAN subnet is 192.168.1.0/24
Do you know if is possible to configure vmnet1 Gateway?
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt
10.254.254.0 * 255.255.255.0 U 0 0 0 eth1 0 0 0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 0 0 0
192.168.254.0 * 255.255.255.0 U 0 0 0 vmnet1 0 0 0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 0 0 0
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0 0 0