Page 1 of 1
External calls are not going to 4645 voicemail
Posted: 18 May 2009 01:56
by sera544
Hi All..
OXE - R.7.1 (F5401.36.b)
Created Voice mail 4645...and Managed Timer 4 ( 300sec).
Internal calls are reaching the voicemail after 7 rings without any problem i can leave a msg but if i coming via PSTN line (DISA enabled) if there is no answer calls are not going to voicemail after 7 rings it's disconnected.
Associated set number is voicemail number..
any idea folks...it's very urgent plz..
cheers
Re: External calls are not going to 4645 voicemail
Posted: 18 May 2009 02:24
by vad
Public Network COS - overflow on free set?
Re: External calls are not going to 4645 voicemail
Posted: 18 May 2009 02:25
by oldboy
Sounds to me like a Access Cat issue, do you have overflow turned on in the Cat, also check overflow on the extn, under Dyn State.
Re: External calls are not going to 4645 voicemail
Posted: 18 May 2009 03:03
by sera544
Hi..
Vad & Oldboy thanx for your quick reply...
In Access cos ..NDDI overflow on free set and DDI over flow on free set is enabled and under dynamic state user overflow is true
any other parameters guyz..
Re: External calls are not going to 4645 voicemail
Posted: 18 May 2009 04:03
by murraya
have you checked the timers in the trunk catagory for your tunk group? If the call exceeds the timer it will fall back to the trunk entity CDT.
Re: External calls are not going to 4645 voicemail
Posted: 18 May 2009 06:13
by oldboy
Are you using Multiline?? If so check parameters under the user settings Multiline, overlflow on No Reply...

Re: External calls are not going to 4645 voicemail
Posted: 18 May 2009 07:44
by sera544
Hi All..
Thanx for your reply guyz..problem sorted out...
When i manage the timer no.4 as 300 ...trunk cos overflow default timer also was 300 so whenever the call comes via pstn overflow timers are same...i reduced the timer no.4 to 250 problem resolved...
thanx a lot guyz...
cheers,
Pandian