Page 1 of 1
Configure DISA
Posted: 25 Apr 2006 04:00
by thanhnguyen
Hi all,
I would like to configure DISA with Alcatel OmniPCX Office. Could you help me to do that.
Many thanks
Thanh Nguyen
Posted: 26 Apr 2006 20:10
by astro
Easy:
First, create a number in the Public Dialling(Numbering) Plan which is type "Remote Substitution", let's say you make it 2222 (and that your installation number is 5555).
Second, go to "External Lines > Remote Substitution". Add an Access Control Code, for example 1234. You can set a voice guidance message (MSG1, MSG2 etc) if you want, otherwise it's just a beep.
Third, go to "Users" and select the user you want to give DISA access to (let's say it's 2020). Press "Details", and then press "Features". In Part 2, put a tick in "Remote Substitution".
So, you've done everything you need to do. Let's test it.
Call the public number you created before: 5555-2222. The system will answer with a beep (or a message if you selected one), which is your prompt to enter your access details. First, enter the system access code (1234), then the User number (2020), and the user's voicemail password (say it's 1234 as well). There will be a momentary pause, and you will recieve internal dial tone. From there you can dial zero or 9 for an outside line or punch in a User number or Speed Dial.
Configure DISA
Posted: 06 Jun 2006 00:05
by thanhnguyen
Hello,
Time for release trunk line is so long. How to solve it?
Many thanks
Release Disa
Posted: 17 Oct 2006 01:06
by votrung
yes,you can not reduce long time release.
Re:
Posted: 16 Mar 2009 07:09
by Bakole
astro wrote:Easy:
First, create a number in the Public Dialling(Numbering) Plan which is type "Remote Substitution", let's say you make it 2222 (and that your installation number is 5555).
Second, go to "External Lines > Remote Substitution". Add an Access Control Code, for example 1234. You can set a voice guidance message (MSG1, MSG2 etc) if you want, otherwise it's just a beep.
Third, go to "Users" and select the user you want to give DISA access to (let's say it's 2020). Press "Details", and then press "Features". In Part 2, put a tick in "Remote Substitution".
So, you've done everything you need to do. Let's test it.
Call the public number you created before: 5555-2222. The system will answer with a beep (or a message if you selected one), which is your prompt to enter your access details. First, enter the system access code (1234), then the User number (2020), and the user's voicemail password (say it's 1234 as well). There will be a momentary pause, and you will recieve internal dial tone. From there you can dial zero or 9 for an outside line or punch in a User number or Speed Dial.
Dear All,
I have a problem with programming remote access
We would like to use one of the line to call in an OXO PBX, Seize another free toll line and call to another office using that toll free line. Can substitution help.
Bakole