BIOS for CPU6 s 2

Vnbadiger · Post by **Vnbadiger** » 02 May 2006 16:56

Do anyone know how to load bios on to CPU6 board.
Pls can mail me the bios file to upload on CPU6 board vnbadiger@rediffmail.com

Post by **vad** » 02 May 2006 22:49

During software installation bios will be updated automaticly.

Post by **frank** » 03 May 2006 20:37

If the bios is being flashed, you'll also see a message telling you that you need to do a HARD RESET (turn off the power on the CPU)

Vnbadiger · Post by **Vnbadiger** » 04 May 2006 16:27

Yes Frank, I did that. When I restarted it the CPU 6 it was not booting up ,no incidents on hyperterminal and Ethernet led was not on whereas on my laptop it should the ethernet link is up (it was direct connection onto the CBRMA connection box).
Any jumper setting required for it to boot. pls let me known I am in dip shit for it.

Post by **frank** » 04 May 2006 23:18

Do you see the bios coming up ?
Can you past the log in here ?
(I mean the screen that you have when it starts / stop)

vali4715 · Post by **vali4715** » 05 May 2006 14:30

My CPU6s2 are stopped sometimes, if you linked on serial, you`ll see that it is in Monitor Main Menu and if you search in CMOS management, it doesn`t see its HDD. If you stop and you restart from ON/OFF, the Alcatel starts like nothing happened and no incidents into.
What do you think about this?
Is this similary with Vnbadiger`s problems?
HDD was changed and didn`t change anything.

Vnbadiger · Post by **Vnbadiger** » 05 May 2006 16:21

I dont see any incidents of CPU booting, which we all see during booting stage.
No ethernet led whereas on laptop network connection shows on. absolutly no activity on CPU.

vali4715 · Post by **vali4715** » 06 May 2006 16:03

My defective CPU is different that you said. Advice: change CPU and test it at your workplace.