Page 1 of 1

5857=GD/GA/INTIP/RGD: reason of reboot 8

Posted: 21 Sep 2009 06:44
by jenneken
Hi all,

I have an Enterprise with R7.1-f5.401-33-ge. The Shelf 1 made an unkown reboot. In incvisu I see: 5857=GD/GA/INTIP/RGD: reason of reboot 8. This means, that the GD gets new binaries. But we didn“t install any update or patch.
Did anybody know what happends?

Greatings Jens



18/09/09 09:43:50 001001M|01/00/-/---|=4:0740=Beginning of an INT/IP downloading @:00.80.9f.36.41.ec (binmg)
18/09/09 09:43:50 001001M|01/00/-/---|=5:0741=End of downloading of an INT/IP board @:00.80.9f.36.41.ec (binmg)
18/09/09 09:44:04 001001M|01/00/-/---|=4:0740=Beginning of an INT/IP downloading @:00.80.9f.36.41.ec (binmgrdimg)
18/09/09 09:44:16 001001M|01/00/-/---|=5:0741=End of downloading of an INT/IP board @:00.80.9f.36.41.ec (binmgrdimg)
18/09/09 09:44:16 001001M|01/00/-/---|=4:0740=Beginning of an INT/IP downloading @:00.80.9f.36.41.ec (binmglinux)
18/09/09 09:44:17 001001M|01/00/-/---|=5:0741=End of downloading of an INT/IP board @:00.80.9f.36.41.ec (binmglinux)
18/09/09 09:45:25 001001M|01/00/-/---|=4:0740=Beginning of an INT/IP downloading @:00.80.9f.36.41.ec (binmgcountry
18/09/09 09:45:26 001001M|01/00/-/---|=5:0741=End of downloading of an INT/IP board @:00.80.9f.36.41.ec (binmgcountry
18/09/09 09:48:22 001001M|01/00/-/---|=4:0740=Beginning of an INT/IP downloading @:00.80.9f.36.41.ec (binmg)
18/09/09 09:48:22 001001M|01/00/-/---|=5:0741=End of downloading of an INT/IP board @:00.80.9f.36.41.ec (binmg)
18/09/09 09:48:30 001001M|01/00/-/---|=5:0409=The inter-ACT link over IP from (19 1) is up
18/09/09 09:48:31 001001M|01/00/-/---|=0:5857=GD/GA/INTIP/RGD: reason of reboot 8
18/09/09 09:48:38 001001M|01/01/-/---|=3:5860=QOS 802.1.q : Vlan id 0 is forbidden

Re: 5857=GD/GA/INTIP/RGD: reason of reboot 8

Posted: 24 Sep 2009 17:11
by aflores
It happens to me once. On my case, the binaries were bad so it make the GD to rebbot. Alcatel support give new binaries and everything goes right.

AFLORES

Re: 5857=GD/GA/INTIP/RGD: reason of reboot 8

Posted: 28 Sep 2009 02:46
by jenneken
Hello,

thank you for the answer. If the reason are the binaries, I will wait. The customer buys an update to R9.

Thank you for help.