OXE 6.0 - configuring isdn trunkgroup for faxserver
Posted: 24 May 2006 08:20
Hi
another newbie is looking for advice
I've got 4 lines ISDN BRI (S0) modem AVM C4 with faxserver Hylafax. The problem is how to configure our OXE (v.6.0) PABX system. I've created trunkgroup of 4 BRI lines , but have no idea how to setup other options to forwad my selected fax numbers to this trunkgroup. I suppose it's some basic trick with DDI ? Using MSN has no sense because of limitations up to 8 subscribers per line. I expect that proper solution wil provide full (and proper) information to faxserwer - caller id, called number , and give posibility to make outgoing calls with individual caller numbers.
I've alredy found cofiguration guidelines for A4400 with Brooktrout faxbord, but I'm not sure if it can be exactly implemented in this case.
Hope it's trivial,and thanks in advance for any help, examples, guidelines, links, etc...
Stefan
another newbie is looking for advice
I've got 4 lines ISDN BRI (S0) modem AVM C4 with faxserver Hylafax. The problem is how to configure our OXE (v.6.0) PABX system. I've created trunkgroup of 4 BRI lines , but have no idea how to setup other options to forwad my selected fax numbers to this trunkgroup. I suppose it's some basic trick with DDI ? Using MSN has no sense because of limitations up to 8 subscribers per line. I expect that proper solution wil provide full (and proper) information to faxserwer - caller id, called number , and give posibility to make outgoing calls with individual caller numbers.
I've alredy found cofiguration guidelines for A4400 with Brooktrout faxbord, but I'm not sure if it can be exactly implemented in this case.
Hope it's trivial,and thanks in advance for any help, examples, guidelines, links, etc...
Stefan
