Alcatel Unleashed

Good Morning, Afternoon, Evening,

Thank You for reviewing this post.

Here is the deal. I have 2 OmniSwitch 6850-24Ls I will call them Switch 1 and Switch 2. Switch 1 is connected via GBIC and LC Fiber Cable to Switch 2 on port 21 on both switches.
Switch 1s IP 192.168.1.1
Switch 2s IP 192.168.1.2
Node on switch 1 IP 192.168.1.20

Problem
Switch 1 is going to be in room A
Switch 2 is going to be in room B
I want any port on Switch 1 to be mirriored to Switch 2s corrisponding ports and that traffic to flow over LC fiber cable

Example
Node connects to Switch 1 Port 1
The data from Switch 1 Port 1 is the same on Switch 2 Port 1

Is this possable and if so How would I do this?

Thanks

hello

this is not possible

you can mirror N port from switch 1 to One port on switch 2 .

But sure it is not possible to make a One to One.

In doc look network guide - chapter 45

Cedric

I assume you're not looking for the mirror-feature.
I think you would like only connect from port 1 to 1, and 2 to 2 etc. at layer 2.
Than you can create 20 vlans (per port) and transfer them all via 802.1q-tagging at ports 21.
regards Silvio