Alcatel Unleashed

hi EVERYBOY,

I have one customer as for a solution and i dont know how to do configution it on actis.
anyone who know how to configuration pls give me an advice.

they have five building, each building have 100 ext.
the main pbx using pabx with IP and Analog phone.
and they want to use remote media gateway connect to each building.
my question is how to generate it on Actis.
And anyone have a another solution pls give me an adive cause i just work with OXE for a few month.
If anyone can give an actis file so that i can import to my Acits and use it as a reference.
Thanks.

anyone help me pls

Hi ..

for configure remote buildings IP phones or remote media gateway u select which ever options is possible for u...to configure remote media gateway in actis go to peripheral areas right click add shelf when u add u can see the subscriber and trunk options to configure..

If u want PCS u can enable the pcs also from this place...

cheers,

i think i still blur about this.
if you want to use remote media gateway u will use VPN or another sulotion.
anyone can give me an example.
thanks

Hi..

You can extend ur data connectivity to the remote buildings or u can use any VPN solution, but matter is Remote media gateway GD ( Ip address ) has to reach the CS ( Ip address )...simple..

sera544 wrote:Hi ..

for configure remote buildings IP phones or remote media gateway u select which ever options is possible for u...to configure remote media gateway in actis go to peripheral areas right click add shelf when u add u can see the subscriber and trunk options to configure..

If u want PCS u can enable the pcs also from this place...

cheers,

Thanks.
i got it.
BTW do you have any useful doc for Actis.
i just work with OXE for a few quotation.

Where are you located Geographically? let me know and i can schedule some time to help you with ACTIS.

Alain