Problems with SIP on OXO
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
Problems with SIP on OXO
Hi,
i have a problem with my SIP-Account on an OXO (Rel 7.1).
I can register by my provider (sipgate) and can receive calls (but only by the default attendant group) but i can't route the sip-call to an extenions and i can't dial out to another sipgate-account or to an isdn-number.
If it helps you i can attach the database so you can see my configuration.
Thanks
Robert
i have a problem with my SIP-Account on an OXO (Rel 7.1).
I can register by my provider (sipgate) and can receive calls (but only by the default attendant group) but i can't route the sip-call to an extenions and i can't dial out to another sipgate-account or to an isdn-number.
If it helps you i can attach the database so you can see my configuration.
Thanks
Robert
Re: Problems with SIP on OXO
Hi Robert
OXO doesn't understand a SIP gateway as extension or trunk. You can make and receive some calls through ARS table and private numbering plan from oxo to SIP gateway and from SIP gateway to oxo. I did some tests with a SIP gateway and it works more or less.
Best regards.
OXO doesn't understand a SIP gateway as extension or trunk. You can make and receive some calls through ARS table and private numbering plan from oxo to SIP gateway and from SIP gateway to oxo. I did some tests with a SIP gateway and it works more or less.
Best regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
Re: Problems with SIP on OXO
That's new for me, i thought sip-trunking is a official feature since rel. 5?
I know that you can't connect sip-extensions to the oxo but trunking must be possible.
As i said before i can give you my database so you can see the config
Thanks
I know that you can't connect sip-extensions to the oxo but trunking must be possible.
As i said before i can give you my database so you can see the config
Thanks
Re: Problems with SIP on OXO
Hi Robert
Since R5.00 SIP is avalliable in oxo.
I did some tests with external gateways in oxo but it didn't work very well due to dial numbers from gateway to oxo.
I read better your first post. Do you have this oxo logged in a SIP server to make external calls? I have some oxo with SIP servers ( VoIP SIP operators in Brazil ).
Send me its database that I see something.
Best ragards.
Since R5.00 SIP is avalliable in oxo.
I did some tests with external gateways in oxo but it didn't work very well due to dial numbers from gateway to oxo.
I read better your first post. Do you have this oxo logged in a SIP server to make external calls? I have some oxo with SIP servers ( VoIP SIP operators in Brazil ).
Send me its database that I see something.
Best ragards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
Re: Problems with SIP on OXO
Hi,
i have attached the database.
You have to delete the extension .txt and put the extension .cdb on the file...(Because the extension .cdb is not allowed in this forum!)
i have attached the database.
You have to delete the extension .txt and put the extension .cdb on the file...(Because the extension .cdb is not allowed in this forum!)
You do not have the required permissions to view the files attached to this post.
Re: Problems with SIP on OXO
Hi Robert
I saw its database. Your configuration seems OK, but you dont't have first step, VoIP-x daugther board and software keys for IP trunk.
Without VoIP-x daugther board and software key you don't get to talk.
With the VoIP board and software key in the oxo you need to do this on your system:
Go to voice over ip --> voip parameters --> general --> set the number of ip trunks at number of voip-trunk channels.
Go to external lines --> list of access --> see if it has the voip access.
Go to external lines --> list of trunks groups --> group #0 --> details --> put the voip access there.
I believe it will work.
Best regards.
I saw its database. Your configuration seems OK, but you dont't have first step, VoIP-x daugther board and software keys for IP trunk.
Without VoIP-x daugther board and software key you don't get to talk.
With the VoIP board and software key in the oxo you need to do this on your system:
Go to voice over ip --> voip parameters --> general --> set the number of ip trunks at number of voip-trunk channels.
Go to external lines --> list of access --> see if it has the voip access.
Go to external lines --> list of trunks groups --> group #0 --> details --> put the voip access there.
I believe it will work.
Best regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
Re: Problems with SIP on OXO
Ahh sorry this pbx is our lab-system and it seems that another guy put my key with the ip-trunk-licences away...the key was with ip-trunk-licences when i tested it (i was able to receive calls...). You think the config is right and it should work?
Re: Problems with SIP on OXO
Hi Robert
OK. Other thing, I saw you are without any configuration at ARS --> gateway parameters --> SIP numbers format index. In our configurations we use as 1 that you can see at ARS --> SIP public number, without this I didn't make calls either.
I had another problem with my schedule with the public operator. In all releases of oxo I tested when I send an invite to SIP server it answers asking 407 proxy authentication required. After this the oxo sends two packets, one ACK that meaning oxo understood and a re-invite. When the oxo sends the reinvite it reverses the dialled number with its A number identification at the message header. Due to this you don't get to make calls I believe. I needed to talk to our SIP provider ( Transit Brazil ) asking them to configure my public IP at the SIP server and this way it doesn't ask 407 proxy authentication required. The call goes ok.
You need to change the SIP numbers format index and if it doesn't works you will need to see the packets with a lan sniffer as wireshark to see if the SIP Server askes proxy.
As I saw I believe you configuration is not wrong and it will work.
Best regards.
OK. Other thing, I saw you are without any configuration at ARS --> gateway parameters --> SIP numbers format index. In our configurations we use as 1 that you can see at ARS --> SIP public number, without this I didn't make calls either.
I had another problem with my schedule with the public operator. In all releases of oxo I tested when I send an invite to SIP server it answers asking 407 proxy authentication required. After this the oxo sends two packets, one ACK that meaning oxo understood and a re-invite. When the oxo sends the reinvite it reverses the dialled number with its A number identification at the message header. Due to this you don't get to make calls I believe. I needed to talk to our SIP provider ( Transit Brazil ) asking them to configure my public IP at the SIP server and this way it doesn't ask 407 proxy authentication required. The call goes ok.
You need to change the SIP numbers format index and if it doesn't works you will need to see the packets with a lan sniffer as wireshark to see if the SIP Server askes proxy.
As I saw I believe you configuration is not wrong and it will work.
Best regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
Re: Problems with SIP on OXO
hi robert,
do u have a solution 4 the sipgate trunk ???
my problem is i cant call out
do u have a solution 4 the sipgate trunk ???
my problem is i cant call out
Re: Problems with SIP on OXO
Hi,
Sipgate Trunk is validated by ALE. Search in Businessportal for the SIP-Profile. Works fine...
Regards
Sipgate Trunk is validated by ALE. Search in Businessportal for the SIP-Profile. Works fine...
Regards