build 4635 on VPU5 does not start properly
Posted: 24 Dec 2009 09:15
We try to build a VPU5 board, using bootp.
SW is on c:\a4635
in c:\etc is the bootptab file with edited ip address
in c:\bootnet is bootp located
When booting from network we get following information an then building process stops. the file A4635U.CFG is in c:\a4635 directory
Enter Network Boot Parameter
Server host name :
Boot file name :
DP83815 phys=emb speed=10Mb duplex=half
My IP 10.253.1.51, Server IP 10.253.1.50, GW IP 10.253.1.50
Loading /a4635/A4635U.CFG ... Unable to load configuration file.
SW is on c:\a4635
in c:\etc is the bootptab file with edited ip address
in c:\bootnet is bootp located
When booting from network we get following information an then building process stops. the file A4635U.CFG is in c:\a4635 directory
Enter Network Boot Parameter
Server host name :
Boot file name :
DP83815 phys=emb speed=10Mb duplex=half
My IP 10.253.1.51, Server IP 10.253.1.50, GW IP 10.253.1.50
Loading /a4635/A4635U.CFG ... Unable to load configuration file.