Page 1 of 1
How to retreive the accouting files via IP/X25.
Posted: 28 Jun 2006 13:44
by abbas
I need to configure the 4760 for three network nodes over IP.
I am unable to configure the remote node on IP/X25 for billing and management purpose.
When try to connect or synchronize , it says wrong IP connection.
Posted: 28 Jun 2006 22:31
by frank
Isn't it a license for the number of nodes you can manage in the 4760 ?
Posted: 03 Jul 2006 02:02
by alex
There is no node number license for 4760.
You have only one node "glued" to 4760.
For a network of PABX' 4760 counts a total number of users in Technical Directory.
From the other point you need 47XX SW keys to be opened in all PABX' managed by 4760.
Posted: 03 Jul 2006 09:50
by frank
I never saw "Wrong IP connection" as an error message..
This is all it says !?
Posted: 03 Jul 2006 21:03
by oldboy
What about the adfexc password has this been changed in the system??? This will stop you from conecting to the system via 4760
Posted: 03 Jul 2006 21:26
by frank
Well.. then it should not say wrong IP address, but "cannot connect" or "bad username/password" ...
Posted: 04 Jul 2006 02:11
by oldboy
Incorrect if the adfexc password is incorrect or has been entered wrong, it will stop it from working...as a test go to cmd prompt type ftp ip address of the system and then login adfexc and password adfexc and see what happens!!!!!
Posted: 04 Jul 2006 05:47
by alex
Abbas,
First make it clear.
Remote nodes are connected to 4760 via IP (LAN) or via IP/X25 tunnel (ABC_F links)?