Page 1 of 1
DID translator
Posted: 10 Jul 2006 04:13
by phengvanna
Hi,
Any one know very wel about DID or default DID translation
Please explain in detail or any document can provide please
Thanks in advances
Vanna.
Posted: 10 Jul 2006 06:22
by vad
You have PTT connection. PTT give you some numbers (external numbers f.e. from 123400 till 123499 - 100 numbers), in you system you have some users (f.e. 3000 - 3099). DID translator allow convert external numbers into internal. You create rule external number 123400, internal number 3000, range 100. It means if PTT send number 123416 in you PBX will ring user 3016.
In PBX can be 100 DID translators (if you have many external connection - f.e. numbers 123400-123499 from one operator, 22000 - 22999 from operator2 ..).
Default DID translator - this is DID translator â„–0.