Alcatel Unleashed

Any idea what is the supported command below?

SW > ip service port 101 admin-state disable
ERROR: Command no longer supported. Please use 'IP SERVICE <service name>' command.

SW > IP SERVICE ?
^
PORT SOURCE-IP TELNET SSH SNMP RADIUS NTP
HTTPS HTTP FTP ALL
(Miscellaneous Command Set)

Hi, Please help as I need to disable TCP/101 below from running on the switch.

Product Category OMNISWITCH 6560
SW Release 8.8.R02
SW Version 8.8.56.R02

SW > show tcp ports

Local Address Local Port Remote Address Remote Port State ...

Hi,

Please help verify if the command below are correct as I need to disable a custom TCP port e,g, TCP/101 from any source to the switch itself,
policy service TCP_101 destination tcp-port 101
policy condition deny_TCP_10161 destination ip Any service TCP_101
policy action deny_TCP_101 disposition ...

I am trying to set up OmniSwitch 6860E to point to NTP server using MD5 authentication.
For Omniswitch to use MD5 authentication where the Key files reside in /flash/network/ntp.keys
Correct me if I am wrong, after generated a key file in a Solaris/Unix environment using keygen utility. Do we need ...

silvio wrote:yes, it should work.
regards
Silvio

Where can I find the list of compatible WAPs & configuration guide for the WLC? Thanks.


Sent from my iPhone using Tapatalk

silvio wrote: ↑27 Sep 2017 01:58 first you have to say what is your start or running directory:
copy certified working make-running-directory

now working is the used directory. you can check with "show running-directory"
regards
Silvio

It works thank you!

Is Hewlett Packard AP (Model: APIN0207) compatible with 4504-XM WLC? Thanks in advanced.

show running-directory

CONFIGURATION STATUS
Running CMM : MASTER-PRIMARY,
CMM Mode : VIRTUAL-CHASSIS MONO CMM,
Current CMM Slot : CHASSIS-1 A,
Running configuration : CERTIFIED,
Certify/Restore Status : CERTIFIED
SYNCHRONIZATION STATUS
Flash Between CMMs : SYNCHRONIZED,
Running Configuration ...

Please help, on OS6860E stack switches, write memory or write memory flash-synchro will gives me the error below

ERROR: Write memory is not permitted when switch is running in certified mode

Is there a command to view what's the ssh version?


Sent from my iPhone using Tapatalk