IP Touch 4028 et 3cx

[antoninmery74]

I managed to use the Telnet command from Windows CMD and to enter the phone. but I have searched the whole forum but I have no more information than that. I will need the binary for the 4028 and the manipulation to load it from telnet.

[cavagnaro]

No, the firmware can't be loaded via telnet.
You need to enable a syslog server and send all data from that phone to your syslog server.
I think the command was netlog, please test.
Another option is as said via Wireshark, capture the traffic from that set and see what it is trying to do.
I think you are already in sip mode but need to configure it correctly.
Without logs no real clue about it

Enviado de meu E6633 usando Tapatalk

[solven]

If you go back into the soft infos menu, do you see a SIPc version? If you don't then your phone might not support SIP. Since you got a TFTP error it's the flashing that fails, if it was the sipconfig file you would get a HTTP error.

And yes, it is the netlog command

[antoninmery74]

I got the binaries for the 4028 and I want to load them into the phone but I can not find the procedure in the phone
help me

my file this names
datsip4028G
noesip4028G

[antoninmery74]

I managed to download these files on the phone via telnet and the command "dwl go sip" all this telechagre but when I restart nothing changes when I start the phone and I go in the settings nothing has changed

[solven]

What does the "APPLICATION=" string say in your lanpbx file?

You should also put the binary files on you tftp server, not the phone itself. As far as I know iptouch phones can't flash from their own memory.

[solven]

It also seems you might need main NOE version 4 or higher to boot from SIP

[solven]

Skjermbildereqe.PNG

Have you done all of this, in addition to the option 66 and 67 stuff?

If you don't know Hex here is a few tips: you don't actualy write the "0x", the ip adress will be in 2*4 blocks hence the two symbols per part of the ip adress. So "172" would be "AC" and "10" would be "0A", check out the wikipedia page in english it has a nice chart.

[cavagnaro]

So how this was fixed at the end? Could help others

Enviado de meu E6633 usando Tapatalk

[giovanni.attolini]

4028 are working well with 3CX? No problems with registration expire time?