Do not display name in SIP-herder

[cavagnaro]

the real question is how are you getting away with replying? are you sneaking into another room from your gf?

Lmao, the power of TapaTalk XD
As long as I stay away from PC except for emergencies we are fine lol

[murraya]

if a guy says we are fine then no issue but when a women says fine then you better watch out.

[cavagnaro]

Haha I know the voice tone when that "Ok" raises. My VAD is enabled lmao

Enviado de meu C6602 usando Tapatalk

[fe80]

Hi,

A workaround is to disable CLIR/RFC3325 but this is needed for privacy outgoing calls.
What was the solution for this without disable CLIR/RFC3325?

I dont want:
From: "real name" <sip:1234@xxx.yyy>

instead I need:
From: <sip:1234@xxx.yyy>

for outgoing calls through ext sip gw (on Rel 12.1)

[tgn]

i do not know an option in oxe for that...

you can remove the “header.from.name” with a manipulation pattern, if you have an audiocodes-sbc.

regards...

[cavagnaro]

Solution would be use a SBC
What you ask in think is not compliant with the RFC OXE support

Enviado de meu E6633 usando o Tapatalk

[fe80]

Okay, thank you clarifying this. In this case OXO is more flexible. Just flipping SIPOgDspNm switch to "false" and you're done..

[cavagnaro]

Hummmmm
Maybe OXO support another RFC set?
The issue is that OXE has many possibilities and I don't recall any documentation that shows sample outputs for each parameter you mess with

Enviado de meu E6633 usando o Tapatalk