CPU8 not booting from ethernet after changing booting sequence in BIOS

This is the main discussion forum, if the subject that you want to talk about is not listed around here.
Post Reply
User avatar
siti
Member
Posts: 27
Joined: 18 Mar 2007 22:17
Location: Fiji

CPU8 not booting from ethernet after changing booting sequence in BIOS

Post by siti »

This is an upgrade from R11.2 to R100.

SOT R3.2.002.106 is installed on my machine.

After changing the booting sequence in the bios, CPU still came back with Press Cntrl B to enter setup, press Cntrl I to boot EFI shell.

ALE Support has directed us to RMA the boards and get a replacement after we have given them the serial numbers for the boards.

The problem we have now is that the customer has a very tight schedule, and if we miss the slot that we have been given, we might be rescheduled to 3 to 4 months from now.

Has anybody encountered this issue somewhere and fixed it????
There is no lift to success.You have to take the stairs - one at a time.
Top
Post Reply

Return to “MAIN”