OXE VMware appliance

cavagnaro · Post by **cavagnaro** » 10 Feb 2007 14:52

I have mine working fine, Piped TCP for Serial port is mandatory, otherwise installation can't be done.

What is weird for me is that a previous installation stopped working on it's piped. Had to reinstall all again, weird.

avk · Post by **avk** » 12 Feb 2007 08:14

cavagnaro wrote:I have mine working fine, Piped TCP for Serial port is mandatory, otherwise installation can't be done.

Installation can be done without Piped TCP for Serial if you choose 'Blade Server' instead of 'Appliance Server' in PC Installer. In that case kernel console isn't redirected to serial port.

Post by **tot3nkopf** » 13 Feb 2007 08:56

You can use a physical COM port of your computer, too, if you don't want to use a piped one

. But what's the point?

tadaxi · Post by **tadaxi** » 08 Apr 2007 10:59

success in R 7.1
OK!!!!

Pc installer choose blade server
can not choose alize/a4400/appliance server

finaluser · Post by **finaluser** » 28 Apr 2007 11:57

Another solution for Serial Port use is to direct to a Pipe with server side on the OXE emulation and as a client in another Virtual machine with another OS , like Linux with Minicom or Windous with HyperTerminal

finaluser · Post by **finaluser** » 22 Sep 2007 12:51

I just install Release 8.0 on Vmware, all is working fine.

For Serial I'm currently using Named Pipe TCP Proxy.

cavagnaro · Post by **cavagnaro** » 12 Feb 2008 15:39

For R8 seems you don't have to do the hack of mac address anymore. I did my install and everything went smooth.

luckyme2 · Post by **luckyme2** » 13 Feb 2008 03:58

finaluser wrote:I just install Release 8.0 on Vmware, all is working fine.

For Serial I'm currently using Named Pipe TCP Proxy.

R8 can be installed as blade server and NPTP is not necessary anymore (at least during install)

lm2

poposami · Post by **poposami** » 04 Sep 2008 02:01

I have OXE R8.0 vm disk,tried to open on another pc.But not able see anything on hyperterminal.I am using named pipe with default port 567 and com_3.When i open serial port com3,hyperterminal show nothing.Vertiual machine is powered up.What setting should i use on the hyperterminal and for named pipe?
Thanks

bouncer_ie · Post by **bouncer_ie** » 07 Oct 2008 04:57

Hi All trying to install 8.01 g1.503 and I keep getting the attached when installing not sure if related to ethernet issue but tried the fix on slimphony and i get a message stating my MAC address is not valid ...any ideas?

vmware.bmp

Alcatel Unleashed

OXE VMware appliance

Re: OXE VMware appliance

Re: OXE VMware appliance

Re: OXE VMware appliance

Re: OXE VMware appliance

Re: OXE VMware appliance