Where can I find the IP address for my INT-IP cards?

[tjm0852]

where is that assigned in the PCX?
what commands will give me that info?

Thanks

[torrentula]

It's either static on the board or DHCP through the system. I always statically assign them.

You can see what it is currently using by going to:

Shelf>Descend>Board>Descend>Ethernet Parameters>Review Modify shelf and board address of the INTIP

[tjm0852]

Great I found it.

I am realizing now that my Gateway IP address is wrong. The board is operating, but I am unable to see it with my network monitoring device.

Can I change the Gateway on the fly or is it something that should be done on off hours?

Does anything else need to be changed anywhere when I change the Gateway IP address?

Thanks

[knightr1der]

Once you change the Gateway address and validate the change, the INTIP board will reset.

So the choice is yours!

[belkhiati_DUP]

hi

with login in mtcl account , you use intipstat to display all IP address INT-IP board in the OXE

best regards

[Gedeon]

On IP board, cplstat Cr Cpl give you information of IP configuration.
G.

[vad]

You can read IP address and/or manage (mgr or 4760) - Shelf/board/Ethernet parameters.

!!! For GA or INTIPA - decleare IP address, Net mask and GW.
!!! For GD or INTIPB - decleare MAC address (IP address GD/INTIPB receive from DHCP or you can decleare static IP address via com port).

[root]

or check all IP boards addresses with compvisu ip add