Third party DECT system

[bouncer_ie]

Guys just curious to know if any of you have used a third party DECT solution with OXE instead of the Alcatel DECT (not handsets full solution). Something like Kirk Telecom or similar. What did you find were the issues if any?

[tincho.rn]

I tried with siemmens gigaset without success. Regards.

[Eliott_DUP]

We use Ascom via Qsig as it supports alarms with localization.

[alcatelspares]

Any Gap phone over £30 works well i have used Panasonic and BT diverse lots of times customer loike to hear that you can spend £� on a phone that will do the same job as a mobile 100/200/300 or 400

[Eliott_DUP]

Any Gap phone over £30 works well i have used Panasonic and BT diverse lots of times customer loike to hear that you can spend £��a phone that will do the same job as a mobile 100/200/300 or 400o/quote]

No.

[cavagnaro]

Uh...no what Elliot?? That doesn't work??

[dangalvez]

We use Ascom via Qsig as it supports alarms with localization.

We plan to use Ascom IP-DECT and we're doing some research on this, can you share which PBX features is working on an Ascom platform? Any advice?

Thanks..

[alexhb]

Hi, We are about to change an 4400 system with 59 IBS by an IP-DECT Ascom solution. Does anybody know if the moile 2XX, 3XX, or 4XX are registrable in the Ascom IP-DECT system? We've been trying to subscribe them into the IP-DECT gateway but we've no succsess.
Thanks!

[krzysioD]

I think that ALU mobiles will not work in GAP/GAP+ enviroment.