PRI problem

lobhugo · Post by **lobhugo** » 31 Dec 2005 02:16

Hi
Working on 4400 R5.0 i have configured a new PRI in addition to the existing one from a different service provider. one is used for incoming calls only and the other for outgoing calls only. All is fine as far as far analog sets are concerned. If i tryan outgoing call from any digital set the moment the line is seized it is disconnected. This also happens from the 4059 console.

Any suggestion?

Thanks

Hugo

Post by **frank** » 02 Jan 2006 14:06

Disconnected, or busy signal, or network congestion on the screen ?

lobhugo · Post by **lobhugo** » 10 Jan 2006 01:32

Hi Frank

Wishing you and all forum members a very happy and prosperous New Year 2006.

Regarding the problem .. yes the phone displays unobtainable.

Regards

Hugo

Post by **frank** » 11 Jan 2006 01:50

and it works from analog sets ?
connection cos are the same ?

Post by **vad** » 11 Jan 2006 03:22

Check public network COS (access COS) and may be digital user in hunting group with public network COS=0?

lobhugo · Post by **lobhugo** » 19 Jan 2006 05:15

Hi
The problem was resolved by managing parameter Caller ID send in Entities. (set to do not send).
Yhanks for your replies

Hugo