OmniPCX Enterprise - Quick Start Guide

niko · Post by **niko** » 08 May 2006 14:51

cavagnaro wrote:are u using mtcl:mtcl? It should work, if not try client client if by luck it is activated

Thanks for the answer. mtcl/mtcl worked

Now am having trouble connecting to the management tool using the browser. The java applet fails to load using any of the browsers?

Is this a known issue?

Thanks Niko

Post by **frank** » 09 May 2006 08:31

Uninstall all java version you have on your computer, then connect to the management tool. It will upload the release you need.

You can also try the standalone at
ALCATEL/TOOLS/stand-alone-client-4760i.zip

niko · Post by **niko** » 09 May 2006 10:07

frank wrote:Uninstall all java version you have on your computer, then connect to the management tool. It will upload the release you need.

You can also try the standalone at
ALCATEL/TOOLS/stand-alone-client-4760i.zip

Thanks a lot Frank

This is a much better client that the one that I was using. At least gives me the username password. Nevertheless when I use mtcl/mtcl it gives me these errors. I thought mtcl was the accunt to use...

Can you help:(. Thanks Niko

10:14:20 AM] > Connecting to 192.168.1.12
[10:14:21 AM] > Connection Failed : Incorrect Logon
[10:14:21 AM] > Connection Failed
[10:14:25 AM] > Connecting to 192.168.1.12
[10:14:26 AM] > Connected to PCX. cpu_oxe.colubris.com
[10:14:39 AM] > Connection to administration server failed.
[10:14:39 AM] > Connection to administration server failed.
[10:14:39 AM] > Connection to administration server failed.
[10:14:40 AM] > cpu_oxe.colubris.com : Insufficient Rights
[10:14:48 AM] > Disconnect from PCX. cpu_oxe.colubris.com
[10:14:48 AM] > Full PCX object model is available.

Post by **frank** » 09 May 2006 14:50

When you use this, login/password is mtcl/mtcl

niko · Post by **niko** » 09 May 2006 16:41

frank wrote:When you use this, login/password is mtcl/mtcl

Hi Frank

this is the combination that am using: mtcl/mtcl

Thoughts?

Thanks Niko

niko · Post by **niko** » 09 May 2006 17:53

cavagnaro wrote:are u using mtcl:mtcl? It should work, if not try client client if by luck it is activated

Hi

I connected finally with the omnivista client but now I get these errors when logged in as mtcl:mtcl

Connecting to 192.168.1.12
[6:00:53 PM] > Connected to PCX. cpu_oxe.colubris.com
[6:00:59 PM] > cpu_oxe.colubris.com : Insufficient Rights
[6:01:00 PM] > Disconnect from PCX. cpu_oxe.colubris.com
[6:01:00 PM] > Full PCX object model is available.

Thoughts? Thanks Niko

Post by **frank** » 09 May 2006 21:25

Are you connecting to a act or media gateway ? Not sure it will work on an act..

niko · Post by **niko** » 09 May 2006 21:50

frank wrote:Are you connecting to a act or media gateway ? Not sure it will work on an act..

Hi

Am connecting to the Call Server Module. Should this worl? Am I in the right place to start configuring the PBX?

Thanks Niko

cavagnaro · Post by **cavagnaro** » 10 May 2006 13:31

Is your 4760i activated? Under System in MGR 4760i and then reboot

niko · Post by **niko** » 10 May 2006 14:53

cavagnaro wrote:Is your 4760i activated? Under System in MGR 4760i and then reboot

Please can you provide the steps how to check this?

I mean I can get to the System->Other System Parameters->System Parameters-?Use of 4670I

I set the value to "True" but am not sure how to save it or how to check that "true" is really ON??

Can you help?

Thanks Niko