Anyone knows how to put the boot.cfg file from the 6850

[akagi]

hye..

Like as topic Anyone knows how to get the boot.cfg file from the 6850, can we put the boot.cfg file to 6850. I already get the boot.cfg file from 6850 and then i want to put that file to enter the configuration as normally i saved before. Can right??

[benny]

If you upload the boot.cfg via FTP you need to reload your switch to boot from this config.

If you upload it with a different name like "additional-config.cfg" you can use the

Switch-> configuration apply additional-config.cfg verbose

to load it into the running-config.

Afterwards you need to do a "write memory" to save your new boot.cfg file.

-benny

[akagi]

what the ftp and tftp PUT command to the restore boot.cfg from remote or local host??
plz give me that command k..
thanks a lot..

[benny]

I don't understand you.... sorry

-b

[raven22]

Hi!
CISCO has command "alias exec wrt copy running-config ftp:...", it copies running-config to FTP server automatically. Anybody knows has 6850 the same functionality?
Or perhaps there is a SNMP commands to copy running-config or boot.cfg to FTP server? Anybody use this commands? Can you post an example of usage of this command?