4400 analog number deletion problem.

ybelal · Post by **ybelal** » 21 May 2006 03:21

i have one analog extension working physically in the system but in mgr or in NMC it is as free number(non existing number.)
But when i try to create the num,ber from mgr or nmc, it says "cql" error.i need to m odify that number or really delete.
I tried also "listrad" but nothing happened.still i see the number using "listerm" or termstat and can make call from that extion.
What can i do now?

Post by **frank** » 21 May 2006 21:53

When you go to the extension under mgr , and you say it s free, are you sure you get the right shelf / board / port number ?

Just wondering if it's a linked ghostZ or something like that

ybelal · Post by **ybelal** » 22 May 2006 04:34

free in mgr means that mgr shows this dn as a free dn.

ybelal · Post by **ybelal** » 22 May 2006 04:36

but with termstat command, i see the dn having an equipment address and it's working in that equipment address with a dial tone.

Post by **frank** » 22 May 2006 15:35

My question was under this equipment, you see an address ?
What if you put 255 / 255 / 255 ?

alex · Post by **alex** » 23 May 2006 06:40

ybelal wrote:but with termstat command, i see the dn having an equipment address and it's working in that equipment address with a dial tone.

First of all, do a restart of a system.When the system starts from DB on a HD a lot of problem with DB in a RAM disappear.

arctus · Post by **arctus** » 29 May 2006 15:21

Hi,

I hope you can all remember me with from security issues posts a while ago. I would just like to know, regarding to this subject, is there a way to manipulate the cql database manually with some sort of tool where you could execute queries?

Thanks!
arctus, SI, EU

Post by **frank** » 29 May 2006 17:34

type cdmao , then cuser