mobile100 reflexes not initilizing

[penny]

i am using oxe R6.2-f3.301-10-ng-c6s2, ibs 4070io part code:3bn66102aabe020540 and using mobile 100 reflex set part code:
3bn67132abac030508. i was configured ibs in the system. when i try to ininilize the mobile 100 reflex, it was showing system1 subscption running...
is it problem with versions or am i using faulty dect handset. i tried with 3 similar handsets.
i attached ibs output from system.

(1)xa000000> dectview ibs


================= DECT RESOURCES BUSY STATE ===============

Resource Max busy free percent busy
-----------------------------------------------------
Link 276 0 276 0.00
LCEI 300 0 300 0.00
ADPCM 0 0 0
Buffer UA-> 135 0 135 0.00

================= IBS States =======================

0/00/12 neqt 648 RPN : 1 INSERV 6 channels DECT V 2G37.00 even IDENT NOR
MAL


(1)xa000000> dectinfo ibs
IBS general informations
------------------------

+------+-------------------+-------------+---------------------+
| Pari ! Hexadecimal value | Octal value | Handover parameters |
+------+-------------------+-------------+---------------------+
| 0 | 12.00.8F.0F | 11000436074 | Default |
+------+-------------------+-------------+---------------------+

Static System Info = 03.FF
Fixed Part Capabilities = 00.51.10 High Layer Attributes = C2.02
Prolonged preamble on IBS-NG is used
MAX IBS by area = 256

[frank]

Once your IBS are configured, up and running, you need to assign the handset to the network using the command dectinston d XXXX , XXXX being the directory number. Then turn on the handset, and when it ask you to register, say yes.. Do it one at the time.

[penny]

i configured gap+ and i tried with same command dectinston d XXXX. still same problem. i am not clear whether pari value is correct.
how to assign pari value in ibs? by default it is 00000000000. is dect handsets not initilising because of pari value?

[frank]

Oh.... Though you had this one.. Yeah.. You need a PARI value for that ..
Just put 100004xxxx0 , xxxx being random numbers

[vad]

DECT system - you say DECT IBS type.
DECT system/IBS - you manage PARI value like 1000040...0 or 4 (10digits).
Shelf - manage PARI value=PARI IBS.