Hi Guys
Im trying to create a SIP trunk. I do have available trunk 10,11 and 12.
When i try to create a new trunk with group ID i.e. 9 or 13 it gives me the error below. Have I reached the maximum number of trunk group for the license that I have or is it something else?
Thanks Niko
:00:49 AM] > Request 28 completed on cpu_oxe: 0 instance(s) received.
[11:00:50 AM] > Create \cpu_oxe\Trunk Groups::9
Trunk Group ID : No fict. trunk ID free
Can't create a SIP trunk, error "No fict. trunk ID free
-
cavagnaro
-
cavagnaro
This problem is due to actis configuration.
You have to modify "hardware.mao" parameters.
To do that, go under /usr3/mao and launch cfgUpdate commande.
then modify 3 parameters :
+ 5 -Trunks => add +200 to the existing value
+ 6 - Equipment_coefficients => generaly set to 1.3/1/4, put it to 9.9 (just write 99)
+ 10 - Shelves (migration excluded) => should be greater than number of existing shelves
PBX reboot mandatory
You have to modify "hardware.mao" parameters.
To do that, go under /usr3/mao and launch cfgUpdate commande.
then modify 3 parameters :
+ 5 -Trunks => add +200 to the existing value
+ 6 - Equipment_coefficients => generaly set to 1.3/1/4, put it to 9.9 (just write 99)
+ 10 - Shelves (migration excluded) => should be greater than number of existing shelves
PBX reboot mandatory
-
niko
Hi Cavagnarocavagnaro wrote:This problem is due to actis configuration.
You have to modify "hardware.mao" parameters.
To do that, go under /usr3/mao and launch cfgUpdate commande.
then modify 3 parameters :
+ 5 -Trunks => add +200 to the existing value
+ 6 - Equipment_coefficients => generaly set to 1.3/1/4, put it to 9.9 (just write 99)
+ 10 - Shelves (migration excluded) => should be greater than number of existing shelves
PBX reboot mandatory
I did set a higher value for the trunk value, set it=250 (old value was 212).
But I don't see value "6"? It jumps from value 5 to 8...Does that makes sense? Thanks Niko.
1 Stations : 196
3 Data terminals : 1000
4 Patients (hospital) - Fictive users : 20
5 Trunks : 250
8 Nodes in the network : 100
10 Shelves (migration excluded) : 1
11 1/2 com : 363
12 TS reserved for operators on INT/RT2 links : 4
13 Tables of R2 signalling translator : 1000
15 Data in R2 signalling translator : 1000
17 Abbreviated numbers : 4000
18 DECT Handsets : 250
19 Supervisable MCDU : 1500
20 Number of Sub-Networks : 16
21 Number of Network Set in Hunting Group : 300
22 Number of ARS route lists : 400
24 Number of areas (accounting duration) : 1000
25 Number of Charge Scales (accounting duration): 30
26 Supervisable Trunks / Trunk groups : 150
27 Number of Network Supervisor : 0
28 Number of PIN : 100
29 Number of CSTA buffer - Monitoring : 1200
30 Number of CSTA buffer - Pilot : 1200
31 Number of CSTA buffer - Service : 500
32 Number of CSTA buffer - RSI : 1200
33 Number of CSTA buffer - Associate/Reference : 1500
34 Number of x25 command abbreviated numbers : 100
35 Number of called filter : 500
36 Maximum Number Of Account Codes : 2000
37 eCC/RSI ByPass lock : 0
38 Number of S0 users / bus on UA : 8
Values read in hardware.mao file :
41 Remanent size : 21462
42 Stand-alone : 0
43 Number of BLF : 1
44 Phone-book (x 2000) : 3
45 SBC : 1
46 4635X : 0
47 4630 : 0
48 4855 : 0
49 Hotel accesses : 1
50 ACD supervisor accesses : 0
51 Set display languages : 4
52 Maximum simultaneous casual conferences : 1
Value to modify (0 = Exit) :
6
Value from 0 to 52
-
cavagnaro
-
niko
-
cavagnaro
-
niko
